{
   document: {
      acknowledgments: [
         {
            organization: "Siemens ProductCERT",
            summary: "reporting these vulnerabilities to CISA.",
         },
      ],
      category: "csaf_security_advisory",
      csaf_version: "2.0",
      distribution: {
         text: "Disclosure is not limited",
         tlp: {
            label: "WHITE",
            url: "https://us-cert.cisa.gov/tlp/",
         },
      },
      lang: "en",
      notes: [
         {
            category: "summary",
            text: "SINEC INS before V1.0 SP2 Update 3 is affected by multiple vulnerabilities.\n\nSiemens has released a new version for SINEC INS and recommends to update to the latest version.",
            title: "Summary",
         },
         {
            category: "general",
            text: "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
            title: "General Recommendations",
         },
         {
            category: "general",
            text: "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
            title: "Additional Resources",
         },
         {
            category: "legal_disclaimer",
            text: "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
            title: "Terms of Use",
         },
         {
            category: "legal_disclaimer",
            text: "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
            title: "Legal Notice",
         },
         {
            category: "other",
            text: "This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.",
            title: "Advisory Conversion Disclaimer",
         },
         {
            category: "other",
            text: "Multiple",
            title: "Critical infrastructure sectors",
         },
         {
            category: "other",
            text: "Worldwide",
            title: "Countries/areas deployed",
         },
         {
            category: "other",
            text: "Germany",
            title: "Company headquarters location",
         },
         {
            category: "general",
            text: "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
            title: "Recommended Practices",
         },
      ],
      publisher: {
         category: "other",
         contact_details: "central@cisa.dhs.gov",
         name: "CISA",
         namespace: "https://www.cisa.gov/",
      },
      references: [
         {
            category: "self",
            summary: "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - CSAF Version",
            url: "https://cert-portal.siemens.com/productcert/csaf/ssa-915275.json",
         },
         {
            category: "self",
            summary: "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - HTML Version",
            url: "https://cert-portal.siemens.com/productcert/html/ssa-915275.html",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-24-319-08 JSON",
            url: "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-319-08.json",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-24-319-08 - Web Version",
            url: "https://www.cisa.gov/news-events/ics-advisories/icsa-24-319-08",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/topics/industrial-control-systems",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B",
         },
      ],
      title: "Siemens SINEC INS",
      tracking: {
         current_release_date: "2024-11-12T00:00:00.000000Z",
         generator: {
            engine: {
               name: "CISA CSAF Generator",
               version: "1.0.0",
            },
         },
         id: "ICSA-24-319-08",
         initial_release_date: "2024-11-12T00:00:00.000000Z",
         revision_history: [
            {
               date: "2024-11-12T00:00:00.000000Z",
               legacy_version: "1.0",
               number: "1",
               summary: "Publication Date",
            },
         ],
         status: "final",
         version: "1",
      },
   },
   product_tree: {
      branches: [
         {
            branches: [
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V1.0_SP2_Update_3",
                        product: {
                           name: "SINEC INS",
                           product_id: "CSAFPID-0001",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SINEC INS",
               },
            ],
            category: "vendor",
            name: "Siemens",
         },
      ],
   },
   vulnerabilities: [
      {
         cve: "CVE-2023-2975",
         cwe: {
            id: "CWE-287",
            name: "Improper Authentication",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-2975",
      },
      {
         cve: "CVE-2023-3341",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "The code that processes control channel messages sent to `named` calls certain functions recursively during packet parsing. Recursion depth is only limited by the maximum accepted packet size; depending on the environment, this may cause the packet-parsing code to run out of available stack memory, causing `named` to terminate unexpectedly. Since each incoming control channel message is fully parsed before its contents are authenticated, exploiting this flaw does not require the attacker to hold a valid RNDC key; only network access to the control channel's configured TCP port is necessary. This issue affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18, 9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1 through 9.18.18-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3341",
      },
      {
         cve: "CVE-2023-3446",
         cwe: {
            id: "CWE-1333",
            name: "Inefficient Regular Expression Complexity",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3446",
      },
      {
         cve: "CVE-2023-3817",
         cwe: {
            id: "CWE-834",
            name: "Excessive Iteration",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3817",
      },
      {
         cve: "CVE-2023-4236",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A flaw in the networking code handling DNS-over-TLS queries may cause `named` to terminate unexpectedly due to an assertion failure. This happens when internal data structures are incorrectly reused under significant DNS-over-TLS query load. This issue affects BIND 9 versions 9.18.0 through 9.18.18 and 9.18.11-S1 through 9.18.18-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4236",
      },
      {
         cve: "CVE-2023-4408",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4408",
      },
      {
         cve: "CVE-2023-4807",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4807",
      },
      {
         cve: "CVE-2023-5517",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect <domain>;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5517",
      },
      {
         cve: "CVE-2023-5678",
         cwe: {
            id: "CWE-754",
            name: "Improper Check for Unusual or Exceptional Conditions",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5678",
      },
      {
         cve: "CVE-2023-5679",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5679",
      },
      {
         cve: "CVE-2023-5680",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5680",
      },
      {
         cve: "CVE-2023-6129",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The POLY1305 MAC (message authentication code) implementation\r\ncontains a bug that might corrupt the internal state of applications running\r\non PowerPC CPU based platforms if the CPU provides vector instructions.\r\n\r\nImpact summary: If an attacker can influence whether the POLY1305 MAC\r\nalgorithm is used, the application state might be corrupted with various\r\napplication dependent consequences.\r\n\r\nThe POLY1305 MAC (message authentication code) implementation in OpenSSL for\r\nPowerPC CPUs restores the contents of vector registers in a different order\r\nthan they are saved. Thus the contents of some of these vector registers\r\nare corrupted when returning to the caller. The vulnerable code is used only\r\non newer PowerPC processors supporting the PowerISA 2.07 instructions.\r\n\r\nThe consequences of this kind of internal application state corruption can\r\nbe various - from no consequences, if the calling application does not\r\ndepend on the contents of non-volatile XMM registers at all, to the worst\r\nconsequences, where the attacker could get complete control of the application\r\nprocess. However unless the compiler uses the vector registers for storing\r\npointers, the most likely consequence, if any, would be an incorrect result\r\nof some application dependent calculations or a crash leading to a denial of\r\nservice.\r\n\r\nThe POLY1305 MAC algorithm is most frequently used as part of the\r\nCHACHA20-POLY1305 AEAD (authenticated encryption with associated data)\r\nalgorithm. The most common usage of this AEAD cipher is with TLS protocol\r\nversions 1.2 and 1.3. If this cipher is enabled on the server a malicious\r\nclient can influence whether this AEAD cipher is used. This implies that\r\nTLS server applications using OpenSSL can be potentially impacted. However\r\nwe are currently not aware of any concrete application that would be affected\r\nby this issue therefore we consider this a Low severity security issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6129",
      },
      {
         cve: "CVE-2023-6237",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6237",
      },
      {
         cve: "CVE-2023-6516",
         cwe: {
            id: "CWE-789",
            name: "Memory Allocation with Excessive Size Value",
         },
         notes: [
            {
               category: "summary",
               text: "To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6516",
      },
      {
         cve: "CVE-2023-7104",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-7104",
      },
      {
         cve: "CVE-2023-32002",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32002",
      },
      {
         cve: "CVE-2023-32003",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32003",
      },
      {
         cve: "CVE-2023-32004",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 8.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32004",
      },
      {
         cve: "CVE-2023-32005",
         cwe: {
            id: "CWE-732",
            name: "Incorrect Permission Assignment for Critical Resource",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32005",
      },
      {
         cve: "CVE-2023-32006",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 8.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32006",
      },
      {
         cve: "CVE-2023-32558",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32558",
      },
      {
         cve: "CVE-2023-32559",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding('spawn_sync')` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32559",
      },
      {
         cve: "CVE-2023-38552",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node's policy implementation, thus effectively disabling the integrity check.\r\nImpacts:\r\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.\r\nPlease note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-38552",
      },
      {
         cve: "CVE-2023-39331",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "A previously disclosed vulnerability (CVE-2023-30584) was patched insufficiently in commit 205f1e6. The new path traversal vulnerability arises because the implementation does not protect itself against the application overwriting built-in utility functions with user-defined implementations.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39331",
      },
      {
         cve: "CVE-2023-39332",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Various `node:fs` functions allow specifying paths as either strings or `Uint8Array` objects. In Node.js environments, the `Buffer` class extends the `Uint8Array` class. Node.js prevents path traversal through strings (see CVE-2023-30584) and `Buffer` objects (see CVE-2023-32004), but not through non-`Buffer` `Uint8Array` objects.\r\n\r\nThis is distinct from CVE-2023-32004 which only referred to `Buffer` objects. However, the vulnerability follows the same pattern using `Uint8Array` instead of `Buffer`.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39332",
      },
      {
         cve: "CVE-2023-39333",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Maliciously crafted export names in an imported WebAssembly module can inject JavaScript code. The injected code may be able to access data and functions that the WebAssembly module itself does not have access to, similar to as if the WebAssembly module was a JavaScript module.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:U/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39333",
      },
      {
         cve: "CVE-2023-44487",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-44487",
      },
      {
         cve: "CVE-2023-45143",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Undici is an HTTP/1.1 client written from scratch for Node.js. Prior to version 5.26.2, Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Cookie` headers. By design, `cookie` headers are forbidden request headers, disallowing them to be set in RequestInit.headers in browser environments. Since undici handles headers more liberally than the spec, there was a disconnect from the assumptions the spec made, and undici's implementation of fetch. As such this may lead to accidental leakage of cookie to a third-party site or a malicious attacker who can control the redirection target (ie. an open redirector) to leak the cookie to the third party site. This was patched in version 5.26.2. There are no known workarounds.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.9,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-45143",
      },
      {
         cve: "CVE-2023-46809",
         cwe: {
            id: "CWE-385",
            name: "Covert Timing Channel",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.4,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-46809",
      },
      {
         cve: "CVE-2023-47038",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47038",
      },
      {
         cve: "CVE-2023-47039",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47039",
      },
      {
         cve: "CVE-2023-47100",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "In Perl before 5.38.2, S_parse_uniprop_string in regcomp.c can write to unallocated space because a property name associated with a \\p{...} regular expression construct is mishandled. The earliest affected version is 5.30.0.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47100",
      },
      {
         cve: "CVE-2023-48795",
         cwe: {
            id: "CWE-222",
            name: "Truncation of Security-relevant Information",
         },
         notes: [
            {
               category: "summary",
               text: "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-48795",
      },
      {
         cve: "CVE-2023-50387",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the \"KeyTrap\" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-50387",
      },
      {
         cve: "CVE-2023-50868",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the \"NSEC3\" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-50868",
      },
      {
         cve: "CVE-2023-52389",
         cwe: {
            id: "CWE-190",
            name: "Integer Overflow or Wraparound",
         },
         notes: [
            {
               category: "summary",
               text: "UTF32Encoding.cpp in POCO has a Poco::UTF32Encoding integer overflow and resultant stack buffer overflow because Poco::UTF32Encoding::convert() and Poco::UTF32::queryConvert() may return a negative integer if a UTF-32 byte sequence evaluates to a value of 0x80000000 or higher. This is fixed in 1.11.8p2, 1.12.5p2, and 1.13.0.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-52389",
      },
      {
         cve: "CVE-2024-0232",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.7,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-0232",
      },
      {
         cve: "CVE-2024-0727",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL\r\nto crash leading to a potential Denial of Service attack\r\n\r\nImpact summary: Applications loading files in the PKCS12 format from untrusted\r\nsources might terminate abruptly.\r\n\r\nA file in PKCS12 format can contain certificates and keys and may come from an\r\nuntrusted source. The PKCS12 specification allows certain fields to be NULL, but\r\nOpenSSL does not correctly check for this case. This can lead to a NULL pointer\r\ndereference that results in OpenSSL crashing. If an application processes PKCS12\r\nfiles from an untrusted source using the OpenSSL APIs then that application will\r\nbe vulnerable to this issue.\r\n\r\nOpenSSL APIs that are vulnerable to this are: PKCS12_parse(),\r\nPKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()\r\nand PKCS12_newpass().\r\n\r\nWe have also fixed a similar issue in SMIME_write_PKCS7(). However since this\r\nfunction is related to writing data we do not consider it security significant.\r\n\r\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-0727",
      },
      {
         cve: "CVE-2024-2511",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.7,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-2511",
      },
      {
         cve: "CVE-2024-4741",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-4741",
      },
      {
         cve: "CVE-2024-5535",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-5535",
      },
      {
         cve: "CVE-2024-21890",
         cwe: {
            id: "CWE-287",
            name: "Improper Authentication",
         },
         notes: [
            {
               category: "summary",
               text: "The Node.js Permission Model does not clarify in the documentation that wildcards should be only used as the last character of a file path. For example: ``` --allow-fs-read=/home/node/.ssh/*.pub ``` will ignore `pub` and give access to everything after `.ssh/`. This misleading documentation affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21890",
      },
      {
         cve: "CVE-2024-21891",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to bypass security restrictions, caused by improper path traversal sequence sanitization. By using a path traversal attack, an attacker could exploit this vulnerability leading to filesystem permission model bypass.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21891",
      },
      {
         cve: "CVE-2024-21892",
         cwe: {
            id: "CWE-94",
            name: "Improper Control of Generation of Code ('Code Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a local authenticated attacker to gain elevated privileges on the system, caused by a bug in the implementation of the exception of CAP_NET_BIND_SERVICE. An attacker could exploit this vulnerability to inject code that inherits the process's elevated privileges.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21892",
      },
      {
         cve: "CVE-2024-21896",
         cwe: {
            id: "CWE-27",
            name: "Path Traversal: 'dir/../../filename'",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to traverse directories on the system. By monkey-patching Buffer internals, namely, Buffer.prototype.utf8Write, an attacker could send a specially crafted URL request containing \"dot dot\" sequences (/../) to read arbitrary files on the system.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.9,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21896",
      },
      {
         cve: "CVE-2024-22017",
         cwe: {
            id: "CWE-250",
            name: "Execution with Unnecessary Privileges",
         },
         notes: [
            {
               category: "summary",
               text: "setuid() does not affect libuv's internal io_uring operations if initialized before the call to setuid(). This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid(). This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:L",
                  version: "3.0",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22017",
      },
      {
         cve: "CVE-2024-22019",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability in Node.js HTTP servers allows an attacker to send a specially crafted HTTP request with chunked encoding, leading to resource exhaustion and denial of service (DoS). The server reads an unbounded number of bytes from a single connection, exploiting the lack of limitations on chunk extension bytes. The issue can cause CPU and network bandwidth exhaustion, bypassing standard safeguards like timeouts and body size limits.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.0",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22019",
      },
      {
         cve: "CVE-2024-22025",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js is vulnerable to a denial of service, caused by a resource exhaustion vulnerability in fetch() brotli decoding . By sending a specially crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22025",
      },
      {
         cve: "CVE-2024-24758",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Proxy-Authentication` headers. This issue has been patched in versions 5.28.3 and 6.6.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.9,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-24758",
      },
      {
         cve: "CVE-2024-24806",
         cwe: {
            id: "CWE-918",
            name: "Server-Side Request Forgery (SSRF)",
         },
         notes: [
            {
               category: "summary",
               text: "libuv is a multi-platform support library with a focus on asynchronous I/O. The `uv_getaddrinfo` function in `src/unix/getaddrinfo.c` (and its windows counterpart `src/win/getaddrinfo.c`), truncates hostnames to 256 characters before calling `getaddrinfo`. This behavior can be exploited to create addresses like `0x00007f000001`, which are considered valid by `getaddrinfo` and could allow an attacker to craft payloads that resolve to unintended IP addresses, bypassing developer checks. The vulnerability arises due to how the `hostname_ascii` variable (with a length of 256 bytes) is handled in `uv_getaddrinfo` and subsequently in `uv__idna_toascii`. When the hostname exceeds 256 characters, it gets truncated without a terminating null byte. As a result attackers may be able to access internal APIs or for websites (similar to MySpace) that allows users to have `username.example.com` pages. Internal services that crawl or cache these user pages can be exposed to SSRF attacks if a malicious user chooses a long vulnerable username. This issue has been addressed in release version 1.48.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-24806",
      },
      {
         cve: "CVE-2024-27980",
         cwe: {
            id: "CWE-78",
            name: "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to execute arbitrary commands on the system, caused by the improper handling of batch files in child_process.spawn / child_process.spawnSync. By sending a specially crafted command line argument using args parameter, an attacker could exploit this vulnerability to inject and execute arbitrary commands on the system.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27980",
      },
      {
         cve: "CVE-2024-27982",
         cwe: {
            id: "CWE-444",
            name: "Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability in the http server, where malformed headers can lead to HTTP request smuggling. Specifically, if a space is placed before a content-length header, it is not interpreted correctly, enabling attackers to smuggle in a second request within the body of the first.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27982",
      },
      {
         cve: "CVE-2024-27983",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js is vulnerable to a denial of service, caused by an assertion failure in `node::http2::Http2Session::~Http2Session()`. By sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside, an attacker could exploit this vulnerability to cause the HTTP/2 server to crash.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27983",
      },
      {
         cve: "CVE-2024-46888",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly sanitize user provided paths for SFTP-based file up- and downloads. This could allow an authenticated remote attacker to manipulate arbitrary files on the filesystem and achieve arbitrary code execution on the device.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.9,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46888",
      },
      {
         cve: "CVE-2024-46889",
         cwe: {
            id: "CWE-321",
            name: "Use of Hard-coded Cryptographic Key",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application uses hard-coded cryptographic key material to obfuscate configuration files. This could allow an attacker to learn that cryptographic key material through reverse engineering of the application binary and decrypt arbitrary backup files.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46889",
      },
      {
         cve: "CVE-2024-46890",
         cwe: {
            id: "CWE-78",
            name: "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly validate input sent to specific endpoints of its web API. This could allow an authenticated remote attacker with high privileges on the application to execute arbitrary code on the underlying OS.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.1,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46890",
      },
      {
         cve: "CVE-2024-46891",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46891",
      },
      {
         cve: "CVE-2024-46892",
         cwe: {
            id: "CWE-613",
            name: "Insufficient Session Expiration",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly invalidate sessions when the associated user is deleted or disabled or their permissions are modified. This could allow an authenticated attacker to continue performing malicious actions even after their user account has been disabled.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46892",
      },
      {
         cve: "CVE-2024-46894",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly validate authorization of a user to query the \"/api/sftp/users\" endpoint. This could allow an authenticated remote attacker to gain knowledge about the list of configured users of the SFTP service and also modify that configuration.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46894",
      },
   ],
}

{
   document: {
      acknowledgments: [
         {
            organization: "Siemens ProductCERT",
            summary: "reporting these vulnerabilities to CISA.",
         },
      ],
      category: "csaf_security_advisory",
      csaf_version: "2.0",
      distribution: {
         text: "Disclosure is not limited",
         tlp: {
            label: "WHITE",
            url: "https://us-cert.cisa.gov/tlp/",
         },
      },
      lang: "en",
      notes: [
         {
            category: "summary",
            text: "SINEC INS before V1.0 SP2 Update 3 is affected by multiple vulnerabilities.\n\nSiemens has released a new version for SINEC INS and recommends to update to the latest version.",
            title: "Summary",
         },
         {
            category: "general",
            text: "As a general security measure, Siemens strongly recommends to protect network access to devices with appropriate mechanisms. In order to operate the devices in a protected IT environment, Siemens recommends to configure the environment according to Siemens' operational guidelines for Industrial Security (Download: \nhttps://www.siemens.com/cert/operational-guidelines-industrial-security), and to follow the recommendations in the product manuals.\nAdditional information on Industrial Security by Siemens can be found at: https://www.siemens.com/industrialsecurity",
            title: "General Recommendations",
         },
         {
            category: "general",
            text: "For further inquiries on security vulnerabilities in Siemens products and solutions, please contact the Siemens ProductCERT: https://www.siemens.com/cert/advisories",
            title: "Additional Resources",
         },
         {
            category: "legal_disclaimer",
            text: "The use of Siemens Security Advisories is subject to the terms and conditions listed on: https://www.siemens.com/productcert/terms-of-use.",
            title: "Terms of Use",
         },
         {
            category: "legal_disclaimer",
            text: "All information products included in https://us-cert.cisa.gov/ics are provided \"as is\" for informational purposes only. The Department of Homeland Security (DHS) does not provide any warranties of any kind regarding any information contained within. DHS does not endorse any commercial product or service, referenced in this product or otherwise. Further dissemination of this product is governed by the Traffic Light Protocol (TLP) marking in the header. For more information about TLP, see https://us-cert.cisa.gov/tlp/.",
            title: "Legal Notice",
         },
         {
            category: "other",
            text: "This CISA CSAF advisory was converted from Siemens ProductCERT's CSAF advisory.",
            title: "Advisory Conversion Disclaimer",
         },
         {
            category: "other",
            text: "Multiple",
            title: "Critical infrastructure sectors",
         },
         {
            category: "other",
            text: "Worldwide",
            title: "Countries/areas deployed",
         },
         {
            category: "other",
            text: "Germany",
            title: "Company headquarters location",
         },
         {
            category: "general",
            text: "CISA recommends users take defensive measures to minimize the exploitation risk of this vulnerability.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Minimize network exposure for all control system devices and/or systems, and ensure they are not accessible from the internet.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Locate control system networks and remote devices behind firewalls and isolate them from business networks.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "When remote access is required, use more secure methods, such as Virtual Private Networks (VPNs), recognizing VPNs may have vulnerabilities and should be updated to the most recent version available. Also recognize VPN is only as secure as its connected devices.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA reminds organizations to perform proper impact analysis and risk assessment prior to deploying defensive measures.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA also provides a section for control systems security recommended practices on the ICS webpage on cisa.gov. Several CISA products detailing cyber defense best practices are available for reading and download, including Improving Industrial Control Systems Cybersecurity with Defense-in-Depth Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "CISA encourages organizations to implement recommended cybersecurity strategies for proactive defense of ICS assets. Additional mitigation guidance and recommended practices are publicly available on the ICS webpage at cisa.gov in the technical information paper, ICS-TIP-12-146-01B--Targeted Cyber Intrusion Detection and Mitigation Strategies.",
            title: "Recommended Practices",
         },
         {
            category: "general",
            text: "Organizations observing suspected malicious activity should follow established internal procedures and report findings to CISA for tracking and correlation against other incidents.",
            title: "Recommended Practices",
         },
      ],
      publisher: {
         category: "other",
         contact_details: "central@cisa.dhs.gov",
         name: "CISA",
         namespace: "https://www.cisa.gov/",
      },
      references: [
         {
            category: "self",
            summary: "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - CSAF Version",
            url: "https://cert-portal.siemens.com/productcert/csaf/ssa-915275.json",
         },
         {
            category: "self",
            summary: "SSA-915275: Multiple Vulnerabilities in SINEC INS Before V1.0 SP2 Update 3 - HTML Version",
            url: "https://cert-portal.siemens.com/productcert/html/ssa-915275.html",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-24-319-08 JSON",
            url: "https://raw.githubusercontent.com/cisagov/CSAF/develop/csaf_files/OT/white/2024/icsa-24-319-08.json",
         },
         {
            category: "self",
            summary: "ICS Advisory ICSA-24-319-08 - Web Version",
            url: "https://www.cisa.gov/news-events/ics-advisories/icsa-24-319-08",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/alerts/ICS-ALERT-10-301-01",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/resources-tools/resources/ics-recommended-practices",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/topics/industrial-control-systems",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/sites/default/files/publications/Cybersecurity_Best_Practices_for_Industrial_Control_Systems.pdf",
         },
         {
            category: "external",
            summary: "Recommended Practices",
            url: "https://www.cisa.gov/uscert/ics/tips/ICS-TIP-12-146-01B",
         },
      ],
      title: "Siemens SINEC INS",
      tracking: {
         current_release_date: "2024-11-12T00:00:00.000000Z",
         generator: {
            engine: {
               name: "CISA CSAF Generator",
               version: "1.0.0",
            },
         },
         id: "ICSA-24-319-08",
         initial_release_date: "2024-11-12T00:00:00.000000Z",
         revision_history: [
            {
               date: "2024-11-12T00:00:00.000000Z",
               legacy_version: "1.0",
               number: "1",
               summary: "Publication Date",
            },
         ],
         status: "final",
         version: "1",
      },
   },
   product_tree: {
      branches: [
         {
            branches: [
               {
                  branches: [
                     {
                        category: "product_version_range",
                        name: "<V1.0_SP2_Update_3",
                        product: {
                           name: "SINEC INS",
                           product_id: "CSAFPID-0001",
                        },
                     },
                  ],
                  category: "product_name",
                  name: "SINEC INS",
               },
            ],
            category: "vendor",
            name: "Siemens",
         },
      ],
   },
   vulnerabilities: [
      {
         cve: "CVE-2023-2975",
         cwe: {
            id: "CWE-287",
            name: "Improper Authentication",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be mislead by removing adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-2975",
      },
      {
         cve: "CVE-2023-3341",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "The code that processes control channel messages sent to `named` calls certain functions recursively during packet parsing. Recursion depth is only limited by the maximum accepted packet size; depending on the environment, this may cause the packet-parsing code to run out of available stack memory, causing `named` to terminate unexpectedly. Since each incoming control channel message is fully parsed before its contents are authenticated, exploiting this flaw does not require the attacker to hold a valid RNDC key; only network access to the control channel's configured TCP port is necessary. This issue affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18, 9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1 through 9.18.18-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3341",
      },
      {
         cve: "CVE-2023-3446",
         cwe: {
            id: "CWE-1333",
            name: "Inefficient Regular Expression Complexity",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. One of those checks confirms that the modulus ('p' parameter) is not too large. Trying to use a very large modulus is slow and OpenSSL will not normally use a modulus which is over 10,000 bits in length. However the DH_check() function checks numerous aspects of the key or parameters that have been supplied. Some of those checks use the supplied modulus value even if it has already been found to be too large. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulernable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the '-check' option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3446",
      },
      {
         cve: "CVE-2023-3817",
         cwe: {
            id: "CWE-834",
            name: "Excessive Iteration",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the \"-check\" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-3817",
      },
      {
         cve: "CVE-2023-4236",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A flaw in the networking code handling DNS-over-TLS queries may cause `named` to terminate unexpectedly due to an assertion failure. This happens when internal data structures are incorrectly reused under significant DNS-over-TLS query load. This issue affects BIND 9 versions 9.18.0 through 9.18.18 and 9.18.11-S1 through 9.18.18-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4236",
      },
      {
         cve: "CVE-2023-4408",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The DNS message parsing code in `named` includes a section whose computational complexity is overly high. It does not cause problems for typical DNS traffic, but crafted queries and responses may cause excessive CPU load on the affected `named` instance by exploiting this flaw. This issue affects both authoritative servers and recursive resolvers. This issue affects BIND 9 versions 9.0.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4408",
      },
      {
         cve: "CVE-2023-4807",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The POLY1305 MAC (message authentication code) implementation contains a bug that might corrupt the internal state of applications on the Windows 64 platform when running on newer X86_64 processors supporting the AVX512-IFMA instructions. Impact summary: If in an application that uses the OpenSSL library an attacker can influence whether the POLY1305 MAC algorithm is used, the application state might be corrupted with various application dependent consequences. The POLY1305 MAC (message authentication code) implementation in OpenSSL does not save the contents of non-volatile XMM registers on Windows 64 platform when calculating the MAC of data larger than 64 bytes. Before returning to the caller all the XMM registers are set to zero rather than restoring their previous content. The vulnerable code is used only on newer x86_64 processors supporting the AVX512-IFMA instructions. The consequences of this kind of internal application state corruption can be various - from no consequences, if the calling application does not depend on the contents of non-volatile XMM registers at all, to the worst consequences, where the attacker could get complete control of the application process. However given the contents of the registers are just zeroized so the attacker cannot put arbitrary values inside, the most likely consequence, if any, would be an incorrect result of some application dependent calculations or a crash leading to a denial of service. The POLY1305 MAC algorithm is most frequently used as part of the CHACHA20-POLY1305 AEAD (authenticated encryption with associated data) algorithm. The most common usage of this AEAD cipher is with TLS protocol versions 1.2 and 1.3 and a malicious client can influence whether this AEAD cipher is used by the server. This implies that server applications using OpenSSL can be potentially impacted. However we are currently not aware of any concrete application that would be affected by this issue therefore we consider this a Low severity security issue. As a workaround the AVX512-IFMA instructions support can be disabled at runtime by setting the environment variable OPENSSL_ia32cap: OPENSSL_ia32cap=:~0x200000 The FIPS provider is not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-4807",
      },
      {
         cve: "CVE-2023-5517",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A flaw in query-handling code can cause `named` to exit prematurely with an assertion failure when: - `nxdomain-redirect <domain>;` is configured, and - the resolver receives a PTR query for an RFC 1918 address that would normally result in an authoritative NXDOMAIN response. This issue affects BIND 9 versions 9.12.0 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.8-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5517",
      },
      {
         cve: "CVE-2023-5678",
         cwe: {
            id: "CWE-754",
            name: "Improper Check for Unusual or Exceptional Conditions",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_generate_key() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DH_check_pub_key(), DH_check_pub_key_ex() or EVP_PKEY_public_check() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DH_check() performs all the necessary checks (as of CVE-2023-3817), DH_check_pub_key() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DH_generate_key() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DH_generate_key() or DH_check_pub_key() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DH_generate_key() and DH_check_pub_key() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_pub_key_ex(), EVP_PKEY_public_check(), and EVP_PKEY_generate(). Also vulnerable are the OpenSSL pkey command line application when using the \"-pubcheck\" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5678",
      },
      {
         cve: "CVE-2023-5679",
         cwe: {
            id: "CWE-617",
            name: "Reachable Assertion",
         },
         notes: [
            {
               category: "summary",
               text: "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5679",
      },
      {
         cve: "CVE-2023-5680",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "A bad interaction between DNS64 and serve-stale may cause `named` to crash with an assertion failure during recursive resolution, when both of these features are enabled. This issue affects BIND 9 versions 9.16.12 through 9.16.45, 9.18.0 through 9.18.21, 9.19.0 through 9.19.19, 9.16.12-S1 through 9.16.45-S1, and 9.18.11-S1 through 9.18.21-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-5680",
      },
      {
         cve: "CVE-2023-6129",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: The POLY1305 MAC (message authentication code) implementation\r\ncontains a bug that might corrupt the internal state of applications running\r\non PowerPC CPU based platforms if the CPU provides vector instructions.\r\n\r\nImpact summary: If an attacker can influence whether the POLY1305 MAC\r\nalgorithm is used, the application state might be corrupted with various\r\napplication dependent consequences.\r\n\r\nThe POLY1305 MAC (message authentication code) implementation in OpenSSL for\r\nPowerPC CPUs restores the contents of vector registers in a different order\r\nthan they are saved. Thus the contents of some of these vector registers\r\nare corrupted when returning to the caller. The vulnerable code is used only\r\non newer PowerPC processors supporting the PowerISA 2.07 instructions.\r\n\r\nThe consequences of this kind of internal application state corruption can\r\nbe various - from no consequences, if the calling application does not\r\ndepend on the contents of non-volatile XMM registers at all, to the worst\r\nconsequences, where the attacker could get complete control of the application\r\nprocess. However unless the compiler uses the vector registers for storing\r\npointers, the most likely consequence, if any, would be an incorrect result\r\nof some application dependent calculations or a crash leading to a denial of\r\nservice.\r\n\r\nThe POLY1305 MAC algorithm is most frequently used as part of the\r\nCHACHA20-POLY1305 AEAD (authenticated encryption with associated data)\r\nalgorithm. The most common usage of this AEAD cipher is with TLS protocol\r\nversions 1.2 and 1.3. If this cipher is enabled on the server a malicious\r\nclient can influence whether this AEAD cipher is used. This implies that\r\nTLS server applications using OpenSSL can be potentially impacted. However\r\nwe are currently not aware of any concrete application that would be affected\r\nby this issue therefore we consider this a Low severity security issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6129",
      },
      {
         cve: "CVE-2023-6237",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6237",
      },
      {
         cve: "CVE-2023-6516",
         cwe: {
            id: "CWE-789",
            name: "Memory Allocation with Excessive Size Value",
         },
         notes: [
            {
               category: "summary",
               text: "To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-6516",
      },
      {
         cve: "CVE-2023-7104",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-7104",
      },
      {
         cve: "CVE-2023-32002",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "The use of `Module._load()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32002",
      },
      {
         cve: "CVE-2023-32003",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "`fs.mkdtemp()` and `fs.mkdtempSync()` can be used to bypass the permission model check using a path traversal attack. This flaw arises from a missing check in the fs.mkdtemp() API and the impact is a malicious actor could create an arbitrary directory.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32003",
      },
      {
         cve: "CVE-2023-32004",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of Buffers in file system APIs causing a traversal path to bypass when verifying file permissions.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 8.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32004",
      },
      {
         cve: "CVE-2023-32005",
         cwe: {
            id: "CWE-732",
            name: "Incorrect Permission Assignment for Critical Resource",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument.\n\nThis flaw arises from an inadequate permission model that fails to restrict file stats through the `fs.statfs` API. As a result, malicious actors can retrieve stats from files that they do not have explicit read access to.\n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32005",
      },
      {
         cve: "CVE-2023-32006",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "The use of `module.constructor.createRequire()` can bypass the policy mechanism and require modules outside of the policy.json definition for a given module.\n\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 16.x, 18.x, and, 20.x.\n\nPlease note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 8.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32006",
      },
      {
         cve: "CVE-2023-32558",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "The use of the deprecated API `process.binding()` can bypass the permission model through path traversal. \n\nThis vulnerability affects all users using the experimental permission model in Node.js 20.x.\n\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32558",
      },
      {
         cve: "CVE-2023-32559",
         cwe: {
            id: "CWE-311",
            name: "Missing Encryption of Sensitive Data",
         },
         notes: [
            {
               category: "summary",
               text: "A privilege escalation vulnerability exists in the experimental policy mechanism in all active release lines: 16.x, 18.x and, 20.x. The use of the deprecated API `process.binding()` can bypass the policy mechanism by requiring internal modules and eventually take advantage of `process.binding('spawn_sync')` run arbitrary code, outside of the limits defined in a `policy.json` file. Please note that at the time this CVE was issued, the policy is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-32559",
      },
      {
         cve: "CVE-2023-38552",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "When the Node.js policy feature checks the integrity of a resource against a trusted manifest, the application can intercept the operation and return a forged checksum to the node's policy implementation, thus effectively disabling the integrity check.\r\nImpacts:\r\nThis vulnerability affects all users using the experimental policy mechanism in all active release lines: 18.x and, 20.x.\r\nPlease note that at the time this CVE was issued, the policy mechanism is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-38552",
      },
      {
         cve: "CVE-2023-39331",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "A previously disclosed vulnerability (CVE-2023-30584) was patched insufficiently in commit 205f1e6. The new path traversal vulnerability arises because the implementation does not protect itself against the application overwriting built-in utility functions with user-defined implementations.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39331",
      },
      {
         cve: "CVE-2023-39332",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Various `node:fs` functions allow specifying paths as either strings or `Uint8Array` objects. In Node.js environments, the `Buffer` class extends the `Uint8Array` class. Node.js prevents path traversal through strings (see CVE-2023-30584) and `Buffer` objects (see CVE-2023-32004), but not through non-`Buffer` `Uint8Array` objects.\r\n\r\nThis is distinct from CVE-2023-32004 which only referred to `Buffer` objects. However, the vulnerability follows the same pattern using `Uint8Array` instead of `Buffer`.\r\n\r\nPlease note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39332",
      },
      {
         cve: "CVE-2023-39333",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Maliciously crafted export names in an imported WebAssembly module can inject JavaScript code. The injected code may be able to access data and functions that the WebAssembly module itself does not have access to, similar to as if the WebAssembly module was a JavaScript module.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N/E:U/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-39333",
      },
      {
         cve: "CVE-2023-44487",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-44487",
      },
      {
         cve: "CVE-2023-45143",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Undici is an HTTP/1.1 client written from scratch for Node.js. Prior to version 5.26.2, Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Cookie` headers. By design, `cookie` headers are forbidden request headers, disallowing them to be set in RequestInit.headers in browser environments. Since undici handles headers more liberally than the spec, there was a disconnect from the assumptions the spec made, and undici's implementation of fetch. As such this may lead to accidental leakage of cookie to a third-party site or a malicious attacker who can control the redirection target (ie. an open redirector) to leak the cookie to the third party site. This was patched in version 5.26.2. There are no known workarounds.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.9,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-45143",
      },
      {
         cve: "CVE-2023-46809",
         cwe: {
            id: "CWE-385",
            name: "Covert Timing Channel",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.4,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-46809",
      },
      {
         cve: "CVE-2023-47038",
         cwe: {
            id: "CWE-787",
            name: "Out-of-bounds Write",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47038",
      },
      {
         cve: "CVE-2023-47039",
         cwe: {
            id: "CWE-122",
            name: "Heap-based Buffer Overflow",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability was found in Perl. This security issue occurs while Perl for Windows relies on the system path environment variable to find the shell (`cmd.exe`). When running an executable that uses the Windows Perl interpreter, Perl attempts to find and execute `cmd.exe` within the operating system. However, due to path search order issues, Perl initially looks for cmd.exe in the current working directory. This flaw allows an attacker with limited privileges to place`cmd.exe` in locations with weak permissions, such as `C:\\ProgramData`. By doing so, arbitrary code can be executed when an administrator attempts to use this executable from these compromised locations.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47039",
      },
      {
         cve: "CVE-2023-47100",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "In Perl before 5.38.2, S_parse_uniprop_string in regcomp.c can write to unallocated space because a property name associated with a \\p{...} regular expression construct is mishandled. The earliest affected version is 5.30.0.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-47100",
      },
      {
         cve: "CVE-2023-48795",
         cwe: {
            id: "CWE-222",
            name: "Truncation of Security-relevant Information",
         },
         notes: [
            {
               category: "summary",
               text: "The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust; and there could be effects on Bitvise SSH through 9.31.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-48795",
      },
      {
         cve: "CVE-2023-50387",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Certain DNSSEC aspects of the DNS protocol (in RFC 4033, 4034, 4035, 6840, and related RFCs) allow remote attackers to cause a denial of service (CPU consumption) via one or more DNSSEC responses, aka the \"KeyTrap\" issue. One of the concerns is that, when there is a zone with many DNSKEY and RRSIG records, the protocol specification implies that an algorithm must evaluate all combinations of DNSKEY and RRSIG records.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-50387",
      },
      {
         cve: "CVE-2023-50868",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The Closest Encloser Proof aspect of the DNS protocol (in RFC 5155 when RFC 9276 guidance is skipped) allows remote attackers to cause a denial of service (CPU consumption for SHA-1 computations) via DNSSEC responses in a random subdomain attack, aka the \"NSEC3\" issue. The RFC 5155 specification implies that an algorithm must perform thousands of iterations of a hash function in certain situations.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-50868",
      },
      {
         cve: "CVE-2023-52389",
         cwe: {
            id: "CWE-190",
            name: "Integer Overflow or Wraparound",
         },
         notes: [
            {
               category: "summary",
               text: "UTF32Encoding.cpp in POCO has a Poco::UTF32Encoding integer overflow and resultant stack buffer overflow because Poco::UTF32Encoding::convert() and Poco::UTF32::queryConvert() may return a negative integer if a UTF-32 byte sequence evaluates to a value of 0x80000000 or higher. This is fixed in 1.11.8p2, 1.12.5p2, and 1.13.0.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.8,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2023-52389",
      },
      {
         cve: "CVE-2024-0232",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "A heap use-after-free issue has been identified in SQLite in the jsonParseAddNodeArray() function in sqlite3.c. This flaw allows a local attacker to leverage a victim to pass specially crafted malicious input to the application, potentially causing a crash and leading to a denial of service.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.7,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-0232",
      },
      {
         cve: "CVE-2024-0727",
         cwe: {
            id: "CWE-20",
            name: "Improper Input Validation",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Processing a maliciously formatted PKCS12 file may lead OpenSSL\r\nto crash leading to a potential Denial of Service attack\r\n\r\nImpact summary: Applications loading files in the PKCS12 format from untrusted\r\nsources might terminate abruptly.\r\n\r\nA file in PKCS12 format can contain certificates and keys and may come from an\r\nuntrusted source. The PKCS12 specification allows certain fields to be NULL, but\r\nOpenSSL does not correctly check for this case. This can lead to a NULL pointer\r\ndereference that results in OpenSSL crashing. If an application processes PKCS12\r\nfiles from an untrusted source using the OpenSSL APIs then that application will\r\nbe vulnerable to this issue.\r\n\r\nOpenSSL APIs that are vulnerable to this are: PKCS12_parse(),\r\nPKCS12_unpack_p7data(), PKCS12_unpack_p7encdata(), PKCS12_unpack_authsafes()\r\nand PKCS12_newpass().\r\n\r\nWe have also fixed a similar issue in SMIME_write_PKCS7(). However since this\r\nfunction is related to writing data we do not consider it security significant.\r\n\r\nThe FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.5,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-0727",
      },
      {
         cve: "CVE-2024-2511",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions\r\nImpact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service This problem can occur in TLSv1.3 if the non-default SSL_OP_NO_TICKET option is being used (but not if early_data support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation. This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients. The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.7,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-2511",
      },
      {
         cve: "CVE-2024-4741",
         cwe: {
            id: "CWE-416",
            name: "Use After Free",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause memory to be accessed that was previously freed in some situations",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:U/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-4741",
      },
      {
         cve: "CVE-2024-5535",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a \"no overlap\" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-5535",
      },
      {
         cve: "CVE-2024-21890",
         cwe: {
            id: "CWE-287",
            name: "Improper Authentication",
         },
         notes: [
            {
               category: "summary",
               text: "The Node.js Permission Model does not clarify in the documentation that wildcards should be only used as the last character of a file path. For example: ``` --allow-fs-read=/home/node/.ssh/*.pub ``` will ignore `pub` and give access to everything after `.ssh/`. This misleading documentation affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21890",
      },
      {
         cve: "CVE-2024-21891",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to bypass security restrictions, caused by improper path traversal sequence sanitization. By using a path traversal attack, an attacker could exploit this vulnerability leading to filesystem permission model bypass.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21891",
      },
      {
         cve: "CVE-2024-21892",
         cwe: {
            id: "CWE-94",
            name: "Improper Control of Generation of Code ('Code Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a local authenticated attacker to gain elevated privileges on the system, caused by a bug in the implementation of the exception of CAP_NET_BIND_SERVICE. An attacker could exploit this vulnerability to inject code that inherits the process's elevated privileges.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.8,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21892",
      },
      {
         cve: "CVE-2024-21896",
         cwe: {
            id: "CWE-27",
            name: "Path Traversal: 'dir/../../filename'",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to traverse directories on the system. By monkey-patching Buffer internals, namely, Buffer.prototype.utf8Write, an attacker could send a specially crafted URL request containing \"dot dot\" sequences (/../) to read arbitrary files on the system.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.9,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:R/S:C/C:H/I:H/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-21896",
      },
      {
         cve: "CVE-2024-22017",
         cwe: {
            id: "CWE-250",
            name: "Execution with Unnecessary Privileges",
         },
         notes: [
            {
               category: "summary",
               text: "setuid() does not affect libuv's internal io_uring operations if initialized before the call to setuid(). This allows the process to perform privileged operations despite presumably having dropped such privileges through a call to setuid(). This vulnerability affects all users using version greater or equal than Node.js 18.18.0, Node.js 20.4.0 and Node.js 21.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.0/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:H/A:L",
                  version: "3.0",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22017",
      },
      {
         cve: "CVE-2024-22019",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability in Node.js HTTP servers allows an attacker to send a specially crafted HTTP request with chunked encoding, leading to resource exhaustion and denial of service (DoS). The server reads an unbounded number of bytes from a single connection, exploiting the lack of limitations on chunk extension bytes. The issue can cause CPU and network bandwidth exhaustion, bypassing standard safeguards like timeouts and body size limits.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.0",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22019",
      },
      {
         cve: "CVE-2024-22025",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js is vulnerable to a denial of service, caused by a resource exhaustion vulnerability in fetch() brotli decoding . By sending a specially crafted request, a remote attacker could exploit this vulnerability to cause a denial of service condition.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-22025",
      },
      {
         cve: "CVE-2024-24758",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici already cleared Authorization headers on cross-origin redirects, but did not clear `Proxy-Authentication` headers. This issue has been patched in versions 5.28.3 and 6.6.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 3.9,
                  baseSeverity: "LOW",
                  vectorString: "CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-24758",
      },
      {
         cve: "CVE-2024-24806",
         cwe: {
            id: "CWE-918",
            name: "Server-Side Request Forgery (SSRF)",
         },
         notes: [
            {
               category: "summary",
               text: "libuv is a multi-platform support library with a focus on asynchronous I/O. The `uv_getaddrinfo` function in `src/unix/getaddrinfo.c` (and its windows counterpart `src/win/getaddrinfo.c`), truncates hostnames to 256 characters before calling `getaddrinfo`. This behavior can be exploited to create addresses like `0x00007f000001`, which are considered valid by `getaddrinfo` and could allow an attacker to craft payloads that resolve to unintended IP addresses, bypassing developer checks. The vulnerability arises due to how the `hostname_ascii` variable (with a length of 256 bytes) is handled in `uv_getaddrinfo` and subsequently in `uv__idna_toascii`. When the hostname exceeds 256 characters, it gets truncated without a terminating null byte. As a result attackers may be able to access internal APIs or for websites (similar to MySpace) that allows users to have `username.example.com` pages. Internal services that crawl or cache these user pages can be exposed to SSRF attacks if a malicious user chooses a long vulnerable username. This issue has been addressed in release version 1.48.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-24806",
      },
      {
         cve: "CVE-2024-27980",
         cwe: {
            id: "CWE-78",
            name: "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js could allow a remote attacker to execute arbitrary commands on the system, caused by the improper handling of batch files in child_process.spawn / child_process.spawnSync. By sending a specially crafted command line argument using args parameter, an attacker could exploit this vulnerability to inject and execute arbitrary commands on the system.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.3,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27980",
      },
      {
         cve: "CVE-2024-27982",
         cwe: {
            id: "CWE-444",
            name: "Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')",
         },
         notes: [
            {
               category: "summary",
               text: "A vulnerability in the http server, where malformed headers can lead to HTTP request smuggling. Specifically, if a space is placed before a content-length header, it is not interpreted correctly, enabling attackers to smuggle in a second request within the body of the first.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.1,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27982",
      },
      {
         cve: "CVE-2024-27983",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "Node.js is vulnerable to a denial of service, caused by an assertion failure in `node::http2::Http2Session::~Http2Session()`. By sending a small amount of HTTP/2 frames packets with a few HTTP/2 frames inside, an attacker could exploit this vulnerability to cause the HTTP/2 server to crash.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 7.5,
                  baseSeverity: "HIGH",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-27983",
      },
      {
         cve: "CVE-2024-46888",
         cwe: {
            id: "CWE-22",
            name: "Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly sanitize user provided paths for SFTP-based file up- and downloads. This could allow an authenticated remote attacker to manipulate arbitrary files on the filesystem and achieve arbitrary code execution on the device.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.9,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46888",
      },
      {
         cve: "CVE-2024-46889",
         cwe: {
            id: "CWE-321",
            name: "Use of Hard-coded Cryptographic Key",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application uses hard-coded cryptographic key material to obfuscate configuration files. This could allow an attacker to learn that cryptographic key material through reverse engineering of the application binary and decrypt arbitrary backup files.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46889",
      },
      {
         cve: "CVE-2024-46890",
         cwe: {
            id: "CWE-78",
            name: "Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly validate input sent to specific endpoints of its web API. This could allow an authenticated remote attacker with high privileges on the application to execute arbitrary code on the underlying OS.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 9.1,
                  baseSeverity: "CRITICAL",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46890",
      },
      {
         cve: "CVE-2024-46891",
         cwe: {
            id: "CWE-400",
            name: "Uncontrolled Resource Consumption",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly restrict the size of generated log files. This could allow an unauthenticated remote attacker to trigger a large amount of logged events to exhaust the system's resources and create a denial of service condition.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 5.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46891",
      },
      {
         cve: "CVE-2024-46892",
         cwe: {
            id: "CWE-613",
            name: "Insufficient Session Expiration",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly invalidate sessions when the associated user is deleted or disabled or their permissions are modified. This could allow an authenticated attacker to continue performing malicious actions even after their user account has been disabled.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 4.9,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:H/A:N/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46892",
      },
      {
         cve: "CVE-2024-46894",
         cwe: {
            id: "CWE-200",
            name: "Exposure of Sensitive Information to an Unauthorized Actor",
         },
         notes: [
            {
               category: "summary",
               text: "The affected application does not properly validate authorization of a user to query the \"/api/sftp/users\" endpoint. This could allow an authenticated remote attacker to gain knowledge about the list of configured users of the SFTP service and also modify that configuration.",
               title: "Summary",
            },
         ],
         product_status: {
            known_affected: [
               "CSAFPID-0001",
            ],
         },
         remediations: [
            {
               category: "vendor_fix",
               details: "Update to V1.0 SP2 Update 3 or later version",
               product_ids: [
                  "CSAFPID-0001",
               ],
               url: "https://support.industry.siemens.com/cs/ww/en/view/109975745/",
            },
         ],
         scores: [
            {
               cvss_v3: {
                  baseScore: 6.3,
                  baseSeverity: "MEDIUM",
                  vectorString: "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:L/E:P/RL:O/RC:C",
                  version: "3.1",
               },
               products: [
                  "CSAFPID-0001",
               ],
            },
         ],
         title: "CVE-2024-46894",
      },
   ],
}