{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Public",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "We strongly recommend the following industry cybersecurity best practices.\n\nhttps://www.se.com/us/en/download/document/7EN52-0390/\n* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.\n* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.\n* Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode.\n* Never connect programming software to any network other than the network intended for that device.\n* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.\n* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.\n* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.\n* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\nFor more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document. \n",
        "title": "General Security Recommendations"
      },
      {
        "category": "general",
        "text": "This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.\nFor further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp",
        "title": "For More Information"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND.  SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION",
        "title": "LEGAL DISCLAIMER"
      },
      {
        "category": "general",
        "text": "At Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment.\n\nWe provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries.\n\nWe are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values.\n\nwww.se.com ",
        "title": "About Schneider Electric"
      },
      {
        "category": "summary",
        "text": "Schneider Electric is aware of a vulnerability in its EcoStruxure\u2122 Power Monitoring Expert\r\n(PME) and EcoStruxure\u2122 Power Operation (EPO) products.\r\nEcoStruxure\u2122 Power Monitoring Expert (PME) is an on-premises software used to help power.\r\ncritical and energy-intensive facilities maximize uptime and operational efficiency.\r\nEcoStruxure\u2122 Power Operation (EPO) and EcoStruxure\u2122 Power SCADA Operation (PSO) are\r\non-premises software offers that provides a single platform to monitor and control medium and\r\nlower power systems.\r\nFailure to apply the remediations provided below could result in execution of malicious web\r\ncode, or unintended software operation.",
        "title": "Overview"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "cpcert@se.com",
      "name": "Schneider Electric CPCERT",
      "namespace": "https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp"
    },
    "references": [
      {
        "category": "self",
        "summary": "EcoStruxure\u2122 Power Monitoring Expert and EcoStruxure\u2122 Power Operation or EcoStruxure\u2122 Power SCADA Operation with Advanced Reporting and Dashboards - SEVD-2024-254-02 PDF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2024-254-02\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=SEVD-2024-254-02.pdf"
      },
      {
        "category": "self",
        "summary": "EcoStruxure\u2122 Power Monitoring Expert and EcoStruxure\u2122 Power Operation or EcoStruxure\u2122 Power SCADA Operation with Advanced Reporting and Dashboards - SEVD-2024-254-02 CSAF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2024-254-02\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=sevd-2024-254-02.json"
      },
      {
        "category": "external",
        "summary": "Recommended Cybersecurity Best Practices",
        "url": "https://www.se.com/us/en/download/document/7EN52-0390/"
      }
    ],
    "title": "EcoStruxure\u2122 Power Monitoring Expert and EcoStruxure\u2122 Power Operation or EcoStruxure\u2122 Power SCADA Operation with Advanced Reporting and Dashboards",
    "tracking": {
      "current_release_date": "2024-09-10T00:00:00.000Z",
      "generator": {
        "date": "2024-09-10T00:00:00.000Z",
        "engine": {
          "name": "Schneider Electric CSAF Generator",
          "version": "1.2"
        }
      },
      "id": "SEVD-2024-254-02",
      "initial_release_date": "2024-09-10T00:00:00.000Z",
      "revision_history": [
        {
          "date": "2024-09-10T00:00:00.000Z",
          "number": "1.0.0",
          "summary": "Original Release"
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2021 CU1",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) 2021 CU1 and prior",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2021"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2020 CU3",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) 2020 CU3 and prior",
                  "product_id": "2"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2020"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2022 CU4",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2022 CU4 and prior",
                  "product_id": "3"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2022"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2022 CU4",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2022 \u2013 Advanced Reporting and Dashboards Module 2022 CU4 and prior",
                  "product_id": "4"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2022 \u2013 Advanced Reporting and Dashboards Module"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2021 CU3 Hotfix 2",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2021 CU3 Hotfix 2 and prior",
                  "product_id": "5"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2021"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=2021 CU3 Hotfix 2",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2021 \u2013 Advanced Reporting and Dashboards Module 2021 CU3 Hotfix 2 and prior",
                  "product_id": "6"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2021 \u2013 Advanced Reporting and Dashboards Module"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power SCADA Operation 2020 (PSO) - Advanced Reporting and Dashboards Module All Versions",
                  "product_id": "7"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power SCADA Operation 2020 (PSO) - Advanced Reporting and Dashboards Module"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "2021 CU2",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) 2021 CU2",
                  "product_id": "8"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2021"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "2022 CU5",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2022 CU5",
                  "product_id": "9"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2022"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "2021 CU3 Hotfix 3",
                "product": {
                  "name": "Schneider Electric EcoStruxure\u2122 Power Operation (EPO) 2021 2021 CU3 Hotfix 3",
                  "product_id": "10"
                }
              }
            ],
            "category": "product_name",
            "name": "EcoStruxure\u2122 Power Operation (EPO) 2021"
          }
        ],
        "category": "vendor",
        "name": "Schneider Electric"
      }
    ]
  },
  "vulnerabilities": [
    {
      "acknowledgments": [
        {
          "names": [
            "McKade Umbenhower"
          ],
          "organization": "Sandia National Labs"
        }
      ],
      "cve": "CVE-2024-8401",
      "cwe": {
        "id": "CWE-79",
        "name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
      },
      "notes": [
        {
          "category": "description",
          "text": "CWE-79: Improper Neutralization of Input During Web Page Generation (\u2018Cross-site Scripting\u2019)\r\nvulnerability exists when an authenticated attacker modifies folder names within the context of\r\nthe product.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "8",
          "9",
          "10"
        ],
        "known_affected": [
          "1",
          "2",
          "3",
          "4",
          "5",
          "6",
          "7"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Monitoring Expert 2021 CU2 includes a fix for\r\nthis vulnerability and is available for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoringexpert/\r\npower-monitoring-expert-2021\r\nOR\r\nEcoStruxure\u2122 Power Monitoring Expert 2022 includes a fix for this\r\nvulnerability and is available for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoringexpert/\r\npower-monitoring-expert-2022\r\nOR\r\nUpgrade to the latest version of EcoStruxure\u2122 Power Monitoring\r\nExpert. Contact the customer care center for more information.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://ecoxpert.se.com/software-center/power-monitoringexpert/"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operations 2022 CU5 includes a fix for this\r\nvulnerability and is available for download here:\r\nhttps://community.se.com/t5/EcoStruxure-Power-Operation/v2022-\r\nRelease-amp-Updates-Install-Procedure/m-p/416561/thread-id/6058\r\nOR\r\nUpgrade to latest version of EcoStruxure\u2122 Power Operations.\r\nContact the customer care center for more information.\r\nAdditionally, EcoStruxure\u2122 Power operation 2022 with Advanced\r\nReporting utilizes EcoStruxure\u2122 Power Monitoring Expert. You will\r\nneed to update the version of EcoStruxure\u2122 Power Monitoring\r\nExpert installed independently of the EcoStruxure\u2122 Power\r\nOperation patch level installed and apply the appropriate\r\nEcoStruxure\u2122 Power Monitoring Expert update as outlined above.\r\nFor assistance in determining the version of PME installed, contact the Schneider Electric Customer Care Center.",
          "product_ids": [
            "3",
            "4"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-Release-amp-Updates-Install-Procedure/m-p/416561/thread-id/6058"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Operations 2021 CU3 Hotfix 3 includes a fix\r\nfor this vulnerability and is available for download here:\r\nhttps://community.se.com/t5/EcoStruxure-Power-Operation/v2022-\r\nRelease-amp-Updates-Install-Procedure/m-p/416561/thread-id/6058\r\nOR\r\nUpgrade to latest version of EcoStruxure\u2122 Power Operations.\r\nContact the customer care center for more information.\r\nAdditionally, EcoStruxure\u2122 Power Operation 2021 with Advanced\r\nReporting utilizes EcoStruxure\u2122 Power Monitoring Expert. You will\r\nneed to update the version of EcoStruxure\u2122 Power Monitoring\r\nExpert installed independently of the EcoStruxure\u2122 Power\r\nOperation patch level installed and apply the appropriate\r\nEcoStruxure\u2122 Power Monitoring Expert update as outlined above.\r\nFor assistance in determining the version of PME installed, contact the Schneider Electric Customer Care Center.",
          "product_ids": [
            "5",
            "6"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://community.se.com/t5/EcoStruxure-Power-Operation/v2022-"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power Monitoring Expert 2020 is at its end-of-life\r\nsupport.\r\nCustomers should consider upgrading to the latest version offering\r\nof PME to resolve this issue. Please contact Schneider Electric\r\nCustomer Care Center for more details.",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.se.com/us/en/work/support/"
        },
        {
          "category": "vendor_fix",
          "details": "EcoStruxure\u2122 Power SCADA Operation 2020 (PSO) - Advanced\r\nReporting and Dashboards Module is at its end-of-life support.\r\nCustomers should consider upgrading to the latest version offering\r\nof EPO to resolve this issue. Please contact Schneider Electric\r\nCustomer Care Center for more details.",
          "product_ids": [
            "7"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.se.com/us/en/work/support/"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 5.4,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "LOW",
            "scope": "CHANGED",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N",
            "version": "3.1"
          },
          "products": [
            "1",
            "2",
            "3",
            "4",
            "5",
            "6",
            "7"
          ]
        }
      ],
      "title": "CVE-2024-8401"
    }
  ]
}