CVE-2026-10665 (GCVE-0-2026-10665)

Vulnerability from cvelistv5 – Published: 2026-07-12 16:16 – Updated: 2026-07-14 18:38
VLAI
Title
Heap buffer overflow on WireGuard receive path via unbounded incoming packet length
Summary
In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN — e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it — the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len > CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity.
SSVC
Exploitation: poc Automatable: no Technical Impact: partial
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-07-13 15:48 UTC
CWE
Impacted products
Vendor Product Version CPE status
zephyrproject zephyr Affected: 4.4.0 , < 4.5.0 (semver)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2026-10665",
                "options": [
                  {
                    "Exploitation": "poc"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-13T15:48:45.958922Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2026-07-13T15:49:10.794Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "references": [
          {
            "tags": [
              "exploit"
            ],
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
          }
        ],
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
          "defaultStatus": "unaffected",
          "packageName": "zephyr",
          "product": "zephyr",
          "programFiles": [
            "subsys/net/lib/wireguard/wg_crypto.c"
          ],
          "vendor": "zephyrproject",
          "versions": [
            {
              "lessThan": "4.5.0",
              "status": "affected",
              "version": "4.4.0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In Zephyr\u0027s WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf-\u003edata, data_len, pkt-\u003ebuffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function\u0027s internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN \u2014 e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it \u2014 the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len \u003e CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.4,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
            "version": "3.1"
          },
          "format": "CVSS"
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-787",
              "description": "bounds",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-07-14T18:38:44.734Z",
        "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "shortName": "zephyr"
      },
      "references": [
        {
          "name": "Fix commit",
          "tags": [
            "patch"
          ],
          "url": "https://github.com/zephyrproject-rtos/zephyr/commit/6d8bb28dc9064e05e52b5a00b2998ecc663e38cb"
        },
        {
          "name": "GHSA-3wqm-wgx2-9367",
          "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
        }
      ],
      "title": "Heap buffer overflow on WireGuard receive path via unbounded incoming packet length",
      "x_generator": {
        "engine": "cvelib 1.8.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
    "assignerShortName": "zephyr",
    "cveId": "CVE-2026-10665",
    "datePublished": "2026-07-12T16:16:49.648Z",
    "dateReserved": "2026-06-02T15:25:26.403Z",
    "dateUpdated": "2026-07-14T18:38:44.734Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-10665",
      "date": "2026-09-29",
      "epss": "0.00602",
      "percentile": "0.46727"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
                "defaultStatus": "unaffected",
                "packageName": "zephyr",
                "product": "zephyr",
                "programFiles": [
                  "subsys/net/lib/wireguard/wg_crypto.c"
                ],
                "vendor": "zephyrproject",
                "versions": [
                  {
                    "lessThan": "4.5.0",
                    "status": "affected",
                    "version": "4.4.0",
                    "versionType": "semver"
                  }
                ]
              }
            ],
            "source": "vulnerabilities@zephyrproject.org"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "751E0B4E-7D5E-4847-ADD2-0A04D95A0577",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "CF3B04E2-F95F-42DD-BA7E-E96D4965E1D3",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:zephyrproject:zephyr:4.4.0:rc3:*:*:*:*:*:*",
                    "matchCriteriaId": "15D1A475-CDAB-486F-82C6-E885E844DA22",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In Zephyr\u0027s WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf-\u003edata, data_len, pkt-\u003ebuffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function\u0027s internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN \u2014 e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it \u2014 the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len \u003e CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity."
          }
        ],
        "id": "CVE-2026-10665",
        "lastModified": "2026-07-16T03:24:44.553",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "HIGH",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 7.4,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "NONE",
                "integrityImpact": "HIGH",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 2.2,
              "impactScore": 5.2,
              "source": "vulnerabilities@zephyrproject.org",
              "type": "Secondary"
            }
          ],
          "ssvcV203": [
            {
              "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "ssvcData": {
                "id": "CVE-2026-10665",
                "options": [
                  {
                    "exploitation": "poc"
                  },
                  {
                    "automatable": "no"
                  },
                  {
                    "technicalImpact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2026-07-13T15:48:45.958922Z",
                "version": "2.0.3"
              }
            }
          ]
        },
        "published": "2026-07-12T17:16:24.433",
        "references": [
          {
            "source": "vulnerabilities@zephyrproject.org",
            "tags": [
              "Patch"
            ],
            "url": "https://github.com/zephyrproject-rtos/zephyr/commit/6d8bb28dc9064e05e52b5a00b2998ecc663e38cb"
          },
          {
            "source": "vulnerabilities@zephyrproject.org",
            "tags": [
              "Exploit",
              "Patch",
              "Vendor Advisory"
            ],
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
          },
          {
            "source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
            "tags": [
              "Exploit",
              "Patch",
              "Vendor Advisory"
            ],
            "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
          }
        ],
        "sourceIdentifier": "vulnerabilities@zephyrproject.org",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-787"
              }
            ],
            "source": "vulnerabilities@zephyrproject.org",
            "type": "Secondary"
          }
        ]
      }
    },
    "vulnrichment": {
      "containers": {
        "adp": [
          {
            "metrics": [
              {
                "other": {
                  "content": {
                    "id": "CVE-2026-10665",
                    "options": [
                      {
                        "Exploitation": "poc"
                      },
                      {
                        "Automatable": "no"
                      },
                      {
                        "Technical Impact": "partial"
                      }
                    ],
                    "role": "CISA Coordinator",
                    "timestamp": "2026-07-13T15:48:45.958922Z",
                    "version": "2.0.3"
                  },
                  "type": "ssvc"
                }
              }
            ],
            "providerMetadata": {
              "dateUpdated": "2026-07-13T15:49:05.088Z",
              "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
              "shortName": "CISA-ADP"
            },
            "references": [
              {
                "tags": [
                  "exploit"
                ],
                "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
              }
            ],
            "title": "CISA ADP Vulnrichment"
          }
        ],
        "cna": {
          "affected": [
            {
              "collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
              "defaultStatus": "unaffected",
              "packageName": "zephyr",
              "product": "zephyr",
              "programFiles": [
                "subsys/net/lib/wireguard/wg_crypto.c"
              ],
              "vendor": "zephyrproject",
              "versions": [
                {
                  "lessThan": "4.5.0",
                  "status": "affected",
                  "version": "4.4.0",
                  "versionType": "semver"
                }
              ]
            }
          ],
          "descriptions": [
            {
              "lang": "en",
              "value": "In Zephyr\u0027s WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf-\u003edata, data_len, pkt-\u003ebuffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function\u0027s internal len = min(len, dst_len) bound. data_len is derived from the received UDP datagram length and is only lower-bounded by wg_ctrl_recv() (no upper bound). When data_len exceeds CONFIG_WIREGUARD_BUF_LEN \u2014 e.g. when the buffer length is lowered below the link MTU, on links with MTU above the buffer size, or via reassembled IPv4/IPv6 fragments that exceed it \u2014 the underlying memcpy writes past the end of the pool buffer, an out-of-bounds write (CWE-787). The overflow occurs before the Poly1305 authentication check, so it requires only a valid receiver session index rather than a valid authenticator, and is reachable by a malicious or compromised peer (or an on-path attacker driving an established session) over the network, yielding remote memory corruption and at minimum a reliable denial of service. The defect was present in the WireGuard implementation shipped in Zephyr 4.4.0. The fix adds an explicit data_len \u003e CONFIG_WIREGUARD_BUF_LEN rejection and corrects the linearize call to pass net_buf_max_len(buf) as the destination capacity."
            }
          ],
          "metrics": [
            {
              "cvssV3_1": {
                "baseScore": 7.4,
                "baseSeverity": "HIGH",
                "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:H",
                "version": "3.1"
              },
              "format": "CVSS"
            }
          ],
          "problemTypes": [
            {
              "descriptions": [
                {
                  "cweId": "CWE-787",
                  "description": "bounds",
                  "lang": "en",
                  "type": "CWE"
                }
              ]
            }
          ],
          "providerMetadata": {
            "dateUpdated": "2026-07-14T18:38:44.734Z",
            "orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
            "shortName": "zephyr"
          },
          "references": [
            {
              "name": "Fix commit",
              "tags": [
                "patch"
              ],
              "url": "https://github.com/zephyrproject-rtos/zephyr/commit/6d8bb28dc9064e05e52b5a00b2998ecc663e38cb"
            },
            {
              "name": "GHSA-3wqm-wgx2-9367",
              "url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3wqm-wgx2-9367"
            }
          ],
          "title": "Heap buffer overflow on WireGuard receive path via unbounded incoming packet length",
          "x_generator": {
            "engine": "cvelib 1.8.0"
          }
        }
      },
      "cveMetadata": {
        "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
        "assignerShortName": "zephyr",
        "cveId": "CVE-2026-10665",
        "datePublished": "2026-07-12T16:16:49.648Z",
        "dateReserved": "2026-06-02T15:25:26.403Z",
        "dateUpdated": "2026-07-14T18:38:44.734Z",
        "state": "PUBLISHED"
      },
      "dataType": "CVE_RECORD",
      "dataVersion": "5.2"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…