{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Public",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "We strongly recommend the following industry cybersecurity best practices.\n\nhttps://www.se.com/us/en/download/document/7EN52-0390/\n* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.\n* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.\n* Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode.\n* Never connect programming software to any network other than the network intended for that device.\n* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.\n* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.\n* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.\n* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\nFor more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document. \n",
        "title": "General Security Recommendations"
      },
      {
        "category": "general",
        "text": "This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.\nFor further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp",
        "title": "For More Information"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND.  SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION",
        "title": "LEGAL DISCLAIMER"
      },
      {
        "category": "general",
        "text": "At Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment.\n\nWe provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries.\n\nWe are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values.\n\nwww.se.com ",
        "title": "About Schneider Electric"
      },
      {
        "category": "summary",
        "text": "Schneider Electric is aware of a vulnerability in its System Monitor application of Harmony\r\nIndustrial PC Series and Pro-face PS5000 trusted Legacy industrial PC Series product(s).\r\nThe Harmony Industrial PC Series and Pro-face PS5000 legacy industrial PC Series are iPCs\r\nwhich incorporate slim, flexible and durable design allowing each customer to configure their\r\niPC based on their individual application needs. These products offer flexible connectivity to a\r\nrange of devices and designs.\r\nFailure to apply the remediations provided below may risk denial of service, sensitive\r\ninformation disclosure, integrity issues , which could result in operational failures.",
        "title": "Overview"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "cpcert@se.com",
      "name": "Schneider Electric CPCERT",
      "namespace": "https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp"
    },
    "references": [
      {
        "category": "self",
        "summary": "System Monitor Application in Harmony and Pro-face PS5000 Legacy Industrial PCs - SEVD-2024-282-07 PDF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2024-282-07\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=SEVD-2024-282-07.pdf"
      },
      {
        "category": "self",
        "summary": "System Monitor Application in Harmony and Pro-face PS5000 Legacy Industrial PCs - SEVD-2024-282-07 CSAF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2024-282-07\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=sevd-2024-282-07.json"
      },
      {
        "category": "external",
        "summary": "Recommended Cybersecurity Best Practices",
        "url": "https://www.se.com/us/en/download/document/7EN52-0390/"
      }
    ],
    "title": "System Monitor Application in Harmony and Pro-face PS5000 Legacy Industrial PCs",
    "tracking": {
      "current_release_date": "2024-10-08T00:00:00.000Z",
      "generator": {
        "date": "2024-10-08T00:00:00.000Z",
        "engine": {
          "name": "Schneider Electric CSAF Generator",
          "version": "1.2"
        }
      },
      "id": "SEVD-2024-282-07",
      "initial_release_date": "2024-10-08T00:00:00.000Z",
      "revision_history": [
        {
          "date": "2024-10-08T00:00:00.000Z",
          "number": "1.0.0",
          "summary": "Original Release"
        }
      ],
      "status": "final",
      "version": "1.0.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Schneider Electric System Monitor application in Harmony Industrial PC All Versions",
                  "product_id": "1",
                  "product_identification_helper": {
                    "model_numbers": [
                      "HMIBMO",
                      "HMIBMI",
                      "HMIPSO",
                      "HMIBMP",
                      "HMIBMU",
                      "HMIPSP",
                      "HMIPEP"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "System Monitor application in Harmony Industrial PC"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "vers:all/*",
                "product": {
                  "name": "Schneider Electric System Monitor application in Pro-face Industrial PC All Versions",
                  "product_id": "2",
                  "product_identification_helper": {
                    "model_numbers": [
                      "PS5000"
                    ]
                  }
                }
              }
            ],
            "category": "product_name",
            "name": "System Monitor application in Pro-face Industrial PC"
          }
        ],
        "category": "vendor",
        "name": "Schneider Electric"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2024-8884",
      "cwe": {
        "id": "CWE-200",
        "name": "Exposure of Sensitive Information to an Unauthorized Actor"
      },
      "notes": [
        {
          "category": "description",
          "text": "CWE-200: Information Exposure vulnerability exists that could cause exposure of credentials\r\nwhen attacker has access to application on network over http.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Customer can uninstall System Monitor application using\r\ninstaller available for download here:\r\nhttps://www.se.com/ww/en/product-range/61054-\r\nharmony-industrial-pc/#software-and-firmware\r\nCustomers should use appropriate patching methodologies when applying these patches to\r\ntheir systems. We strongly recommend the use of back-ups and evaluating the impact of these\r\npatches in a Test and Development environment or on an offline infrastructure. Contact\r\nSchneider Electric\u2019s Customer Care Center if you need assistance removing a patch. Please follow the steps described in the guideline\r\nattached as a .pdf in the downloaded uninstaller\r\nguide. We strongly recommend the use of back-ups and evaluating the impact of this uninstaller in a\r\nTest and Development environment or on an offline infrastructure. Contact Schneider Electric\u2019s\r\nCustomer Care Center if you need assistance.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.se.com/ww/en/product-range/61054-harmony-industrial-pc/#software-and-firmware"
        },
        {
          "category": "vendor_fix",
          "details": "Customer can uninstall System Monitor application using\r\ninstaller available for download here:\r\nhttps://www.proface.com/en/product/ipc/ps5000/download\r\n\r\nCustomers should use appropriate patching methodologies when applying these patches to\r\ntheir systems. We strongly recommend the use of back-ups and evaluating the impact of these\r\npatches in a Test and Development environment or on an offline infrastructure. Contact\r\nSchneider Electric\u2019s Customer Care Center if you need assistance removing a patch. Please follow the steps described in the guideline\r\nattached as a .pdf in the downloaded uninstaller\r\nguide.We strongly recommend the use of back-ups and evaluating the impact of this uninstaller in a\r\nTest and Development environment or on an offline infrastructure. Contact Schneider Electric\u2019s\r\nCustomer Care Center if you need assistance.",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.proface.com/en/product/ipc/ps5000/download"
        },
        {
          "category": "mitigation",
          "details": "If customers choose not to apply the remediation provided above, they should immediately\r\napply the following mitigations to reduce the risk of exploit:\r\n\u2022 Stop the system monitor if not required by turning off the services as specified in user\r\nguide:\r\no Harmony Industrial PC Series User Manual\r\n\r\n\u2022 Setup network segmentation and implement a firewall to block all unauthorized access\r\nto configured HTTP/HTTPS ports.",
          "product_ids": [
            "1"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.se.com/ww/en/download/document/EIO0000002042/"
        },
        {
          "category": "mitigation",
          "details": "If customers choose not to apply the remediation provided above, they should immediately\r\napply the following mitigations to reduce the risk of exploit:\r\n\u2022 Stop the system monitor if not required by turning off the services as specified in user\r\nguide:\r\nPro-face PS5000 legacy industrial PC Series User Manual\r\n\r\n\u2022 Setup network segmentation and implement a firewall to block all unauthorized access\r\nto configured HTTP/HTTPS ports.",
          "product_ids": [
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.proface.com/en/node/39458"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "HIGH",
            "baseScore": 9.8,
            "baseSeverity": "CRITICAL",
            "confidentialityImpact": "HIGH",
            "integrityImpact": "HIGH",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2024-8884"
    }
  ]
}