SEVD-2023-318-02
Vulnerability from csaf_se - Published: 2023-11-14 00:00 - Updated: 2023-11-14 00:00Summary
EcoStruxure Power Monitoring Expert and EcoStruxure™ Power Operation with Advanced Reporting and Dashboards Module
Notes
General Security Recommendations
We strongly recommend the following industry cybersecurity best practices.
https://www.se.com/us/en/download/document/7EN52-0390/
* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.
* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.
* Place all controllers in locked cabinets and never leave them in the “Program” mode.
* Never connect programming software to any network other than the network intended for that device.
* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.
* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.
* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.
* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.
For more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document.
For More Information
This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.
For further information related to cybersecurity in Schneider Electric’s products, visit the company’s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp
LEGAL DISCLAIMER
THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS “NOTIFICATION”) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN “AS-IS” BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION
About Schneider Electric
At Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment.
We provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries.
We are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values.
www.se.com
Overview
Schneider Electric is aware of multiple vulnerabilities in its EcoStruxure™ Power Monitoring
Expert (PME) product, EcoStruxure™ Power Operation (EPO) and EcoStruxure™ Power
SCADA Operation (PSO) - Advanced Reporting and Dashboards Module.
EcoStruxure™ Power Monitoring Expert (PME) is an on-premises software used to help power
critical and energy-intensive facilities maximize uptime and operational efficiency.
EcoStruxure™ Power Operation (EPO) and EcoStruxure™ Power SCADA Operation (PSO) are
on-premises software offers that provides a single platform to monitor and control medium and
lower power systems.
Failure to apply the remediation provided below may risk a Cross Site Scripting or an open
redirect attack which could result in an account takeover scenario or the execution of code in
the user browser
{
"document": {
"category": "csaf_security_advisory",
"csaf_version": "2.0",
"distribution": {
"text": "Public",
"tlp": {
"label": "WHITE"
}
},
"lang": "en-US",
"notes": [
{
"category": "general",
"text": "We strongly recommend the following industry cybersecurity best practices.\n\nhttps://www.se.com/us/en/download/document/7EN52-0390/\n* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.\n* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.\n* Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode.\n* Never connect programming software to any network other than the network intended for that device.\n* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.\n* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.\n* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.\n* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\nFor more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document. \n",
"title": "General Security Recommendations"
},
{
"category": "general",
"text": "This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.\nFor further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp",
"title": "For More Information"
},
{
"category": "legal_disclaimer",
"text": "THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND. SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION",
"title": "LEGAL DISCLAIMER"
},
{
"category": "general",
"text": "At Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment.\n\nWe provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries.\n\nWe are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values.\n\nwww.se.com ",
"title": "About Schneider Electric"
},
{
"category": "summary",
"text": "Schneider Electric is aware of multiple vulnerabilities in its EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) product, EcoStruxure\u2122 Power Operation (EPO) and EcoStruxure\u2122 Power \r\nSCADA Operation (PSO) - Advanced Reporting and Dashboards Module.\r\nEcoStruxure\u2122 Power Monitoring Expert (PME) is an on-premises software used to help power \r\ncritical and energy-intensive facilities maximize uptime and operational efficiency.\r\nEcoStruxure\u2122 Power Operation (EPO) and EcoStruxure\u2122 Power SCADA Operation (PSO) are \r\non-premises software offers that provides a single platform to monitor and control medium and \r\nlower power systems.\r\nFailure to apply the remediation provided below may risk a Cross Site Scripting or an open \r\nredirect attack which could result in an account takeover scenario or the execution of code in \r\nthe user browser",
"title": "Overview"
}
],
"publisher": {
"category": "vendor",
"contact_details": "cybersecurity@se.com",
"name": "Schneider Electric CPCERT",
"namespace": "https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp"
},
"references": [
{
"category": "self",
"summary": "EcoStruxure Power Monitoring Expert and EcoStruxure\u2122 Power Operation with Advanced Reporting and Dashboards Module - SEVD-2023-318-02 PDF Version",
"url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2023-318-02\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=SEVD-2023-318-02.pdf"
},
{
"category": "self",
"summary": "EcoStruxure Power Monitoring Expert and EcoStruxure\u2122 Power Operation with Advanced Reporting and Dashboards Module - SEVD-2023-318-02 CSAF Version",
"url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2023-318-02\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=sevd-2023-318-02.json"
},
{
"category": "external",
"summary": "Recommended Cybersecurity Best Practices",
"url": "https://www.se.com/us/en/download/document/7EN52-0390/"
}
],
"title": "EcoStruxure Power Monitoring Expert and EcoStruxure\u2122 Power Operation with Advanced Reporting and Dashboards Module",
"tracking": {
"current_release_date": "2023-11-14T00:00:00.000Z",
"generator": {
"date": "2023-11-13T08:23:08.337Z",
"engine": {
"name": "Schneider Electric CSAF Generator",
"version": "1.2"
}
},
"id": "SEVD-2023-318-02",
"initial_release_date": "2023-11-14T00:00:00.000Z",
"revision_history": [
{
"date": "2023-11-14T07:56:20.000Z",
"number": "1.0.0",
"summary": "Original Release"
}
],
"status": "final",
"version": "1.0.0"
}
},
"product_tree": {
"branches": [
{
"branches": [
{
"branches": [
{
"category": "product_version_range",
"name": "\u003c=2021 CU1",
"product": {
"name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) version 2021 CU1 and prior",
"product_id": "1"
}
}
],
"category": "product_name",
"name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2021"
},
{
"branches": [
{
"category": "product_version_range",
"name": "\u003c=2020 CU2",
"product": {
"name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) 2020 version 2020 CU2 and prior",
"product_id": "2"
}
}
],
"category": "product_name",
"name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2020"
},
{
"branches": [
{
"category": "product_version_range",
"name": "\u003c=2021 CU1",
"product": {
"name": "Schneider Electric Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power Operation version 2021 CU1 and prior",
"product_id": "3"
}
}
],
"category": "product_name",
"name": "Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power Operation 2021"
},
{
"branches": [
{
"category": "product_version_range",
"name": "\u003c=2020 CU2",
"product": {
"name": "Schneider Electric Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power SCADA Operation (PSO) 2020 or 2020 R2 Note 1: Power SCADA Operation and Power Operation without the Advanced Reporting and Dashboards Module are not affected. Note 2: Advanced Reporting and Dashboards Module is equivalent to EcoStruxure\u2122 Power Monitoring Expert. version 2020 CU2 and prior",
"product_id": "4"
}
}
],
"category": "product_name",
"name": "Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power SCADA Operation (PSO) 2020 or 2020 R2 Note 1: Power SCADA Operation and Power Operation without the Advanced Reporting and Dashboards Module are not affected. Note 2: Advanced Reporting and Dashboards Module is equivalent to EcoStruxure\u2122 Power Monitoring Expert."
},
{
"branches": [
{
"category": "product_version",
"name": "2021 CU2",
"product": {
"name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) version 2021 CU2",
"product_id": "5"
}
}
],
"category": "product_name",
"name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2021"
},
{
"branches": [
{
"category": "product_version",
"name": "2020 CU3",
"product": {
"name": "Schneider Electric EcoStruxure\u2122 Power Monitoring Expert (PME) version 2020 CU3",
"product_id": "6"
}
}
],
"category": "product_name",
"name": "EcoStruxure\u2122 Power Monitoring Expert (PME) 2020"
},
{
"branches": [
{
"category": "product_version",
"name": "2021 CU2",
"product": {
"name": "Schneider Electric Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power Operation version 2021 CU2",
"product_id": "7"
}
}
],
"category": "product_name",
"name": "Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power Operation 2021"
},
{
"branches": [
{
"category": "product_version",
"name": "2020 CU3",
"product": {
"name": "Schneider Electric Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power SCADA Operation (PSO) 2020 or 2020 R2 version 2020 CU3",
"product_id": "8"
}
}
],
"category": "product_name",
"name": "Advanced Reporting and Dashboards Module for EcoStruxure\u2122 Power SCADA Operation (PSO) 2020 or 2020 R2"
}
],
"category": "vendor",
"name": "Schneider Electric"
}
]
},
"vulnerabilities": [
{
"cve": "CVE-2023-5986",
"cwe": {
"id": "CWE-601",
"name": "URL Redirection to Untrusted Site (\u0027Open Redirect\u0027)"
},
"notes": [
{
"category": "description",
"text": "A CWE-601 URL Redirection to Untrusted Site vulnerability exists that could cause an open\u0002redirect vulnerability leading to a cross site scripting attack. By providing a URL-encoded input \r\nattackers can cause the software\u2019s web application to redirect to the chosen domain after a \r\nsuccessful login is performed. ",
"title": "CVE Description"
}
],
"product_status": {
"fixed": [
"5",
"6",
"7",
"8"
],
"known_affected": [
"1",
"2",
"3",
"4"
]
},
"remediations": [
{
"category": "vendor_fix",
"details": "Version 2021 CU2 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021",
"product_ids": [
"1"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021"
},
{
"category": "vendor_fix",
"details": "Version 2020 CU3 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2020",
"product_ids": [
"2"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2020"
},
{
"category": "vendor_fix",
"details": "Version 2021 CU2 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2021\r\nNOTE: Advanced Reporting and Dashboards Module is the\r\ncommercial name for PME which is why, in this case, you \r\nare asked to download and install PME 2020 CU3.",
"product_ids": [
"3"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021"
},
{
"category": "vendor_fix",
"details": "Version 2020 CU3 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2020\r\nNOTE: Advanced Reporting and Dashboards Module is the\r\ncommercial name for PME which is why, in this case, you \r\nare asked to download and install PME 2020 CU3",
"product_ids": [
"4"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2020"
}
],
"scores": [
{
"cvss_v3": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 8.2,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "CHANGED",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:L/A:N",
"version": "3.1"
},
"products": [
"1",
"2",
"3",
"4"
]
}
],
"title": "CVE-2023-5986"
},
{
"cve": "CVE-2023-5987",
"cwe": {
"id": "CWE-79",
"name": "Improper Neutralization of Input During Web Page Generation (\u0027Cross-site Scripting\u0027)"
},
"notes": [
{
"category": "description",
"text": "A CWE-79 Improper Neutralization of Input During Web Page Generation (Cross-site Scripting) \r\nvulnerability that could cause a vulnerability leading to a cross site scripting condition where \r\nattackers can have a victim\u2019s browser run arbitrary JavaScript when they visit a page containing \r\nthe injected payload",
"title": "CVE Description"
}
],
"product_status": {
"fixed": [
"5",
"6",
"7",
"8"
],
"known_affected": [
"1",
"2",
"3",
"4"
]
},
"remediations": [
{
"category": "vendor_fix",
"details": "Version 2021 CU2 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021",
"product_ids": [
"1"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021"
},
{
"category": "vendor_fix",
"details": "Version 2020 CU3 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2020",
"product_ids": [
"2"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2020"
},
{
"category": "vendor_fix",
"details": "Version 2021 CU2 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2021\r\nNOTE: Advanced Reporting and Dashboards Module is the\r\ncommercial name for PME which is why, in this case, you \r\nare asked to download and install PME 2020 CU3.",
"product_ids": [
"3"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2021"
},
{
"category": "vendor_fix",
"details": "Version 2020 CU3 of EcoStruxure\u2122 Power Monitoring \r\nExpert (PME) includes a fix for these vulnerabilities and is \r\navailable for download here:\r\nhttps://ecoxpert.se.com/software-center/power-monitoring\u0002expert/power-monitoring-expert-2020\r\nNOTE: Advanced Reporting and Dashboards Module is the\r\ncommercial name for PME which is why, in this case, you \r\nare asked to download and install PME 2020 CU3",
"product_ids": [
"4"
],
"restart_required": {
"category": "none"
},
"url": "https://ecoxpert.se.com/software-center/power-monitoring-expert/power-monitoring-expert-2020"
}
],
"scores": [
{
"cvss_v3": {
"attackComplexity": "LOW",
"attackVector": "NETWORK",
"availabilityImpact": "NONE",
"baseScore": 6.1,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "LOW",
"environmentalScore": 6.1,
"environmentalSeverity": "MEDIUM",
"integrityImpact": "LOW",
"privilegesRequired": "NONE",
"scope": "CHANGED",
"temporalScore": 6.1,
"temporalSeverity": "MEDIUM",
"userInteraction": "REQUIRED",
"vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N",
"version": "3.1"
},
"products": [
"1",
"2",
"3",
"4"
]
}
],
"title": "CVE-2023-5987"
}
]
}
Loading…
Loading…
Sightings
| Author | Source | Type | Date |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
Loading…