{
  "document": {
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "distribution": {
      "text": "Public",
      "tlp": {
        "label": "WHITE"
      }
    },
    "lang": "en-US",
    "notes": [
      {
        "category": "general",
        "text": "We strongly recommend the following industry cybersecurity best practices.\n\nhttps://www.se.com/us/en/download/document/7EN52-0390/\n* Locate control and safety system networks and remote devices behind firewalls and isolate them from the business network.\n* Install physical controls so no unauthorized personnel can access your industrial control and safety systems, components, peripheral equipment, and networks.\n* Place all controllers in locked cabinets and never leave them in the \u201cProgram\u201d mode.\n* Never connect programming software to any network other than the network intended for that device.\n* Scan all methods of mobile data exchange with the isolated network such as CDs, USB drives, etc. before use in the terminals or any node connected to these networks.\n* Never allow mobile devices that have connected to any other network besides the intended network to connect to the safety or control networks without proper sanitation.\n* Minimize network exposure for all control system devices and systems and ensure that they are not accessible from the Internet.\n* When remote access is required, use secure methods, such as Virtual Private Networks (VPNs). Recognize that VPNs may have vulnerabilities and should be updated to the most current version available. Also, understand that VPNs are only as secure as the connected devices.\nFor more information refer to the Schneider Electric Recommended Cybersecurity Best Practices document. \n",
        "title": "General Security Recommendations"
      },
      {
        "category": "general",
        "text": "This document provides an overview of the identified vulnerability or vulnerabilities and actions required to mitigate. For more details and assistance on how to protect your installation, contact your local Schneider Electric representative or Schneider Electric Industrial Cybersecurity Services: https://www.se.com/ww/en/work/solutions/cybersecurity/. These organizations will be fully aware of this situation and can support you through the process.\nFor further information related to cybersecurity in Schneider Electric\u2019s products, visit the company\u2019s cybersecurity support portal page: https://www.se.com/ww/en/work/support/cybersecurity/overview.jsp",
        "title": "For More Information"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS NOTIFICATION DOCUMENT, THE INFORMATION CONTAINED HEREIN, AND ANY MATERIALS LINKED FROM IT (COLLECTIVELY, THIS \u201cNOTIFICATION\u201d) ARE INTENDED TO HELP PROVIDE AN OVERVIEW OF THE IDENTIFIED SITUATION AND SUGGESTED MITIGATION ACTIONS, REMEDIATION, FIX, AND/OR GENERAL SECURITY RECOMMENDATIONS AND IS PROVIDED ON AN \u201cAS-IS\u201d BASIS WITHOUT WARRANTY OR GUARANTEE OF ANY KIND.  SCHNEIDER ELECTRIC DISCLAIMS ALL WARRANTIES RELATING TO THIS NOTIFICATION, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SCHNEIDER ELECTRIC MAKES NO WARRANTY THAT THE NOTIFICATION WILL RESOLVE THE IDENTIFIED SITUATION. IN NO EVENT SHALL SCHNEIDER ELECTRIC BE LIABLE FOR ANY DAMAGES OR LOSSES WHATSOEVER IN CONNECTION WITH THIS NOTIFICATION, INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF SCHNEIDER ELECTRIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOUR USE OF THIS NOTIFICATION IS AT YOUR OWN RISK, AND YOU ARE SOLELY LIABLE FOR ANY DAMAGES TO YOUR SYSTEMS OR ASSETS OR OTHER LOSSES THAT MAY RESULT FROM YOUR USE OF THIS NOTIFICATION. SCHNEIDER ELECTRIC RESERVES THE RIGHT TO UPDATE OR CHANGE THIS NOTIFICATION AT ANY TIME AND IN ITS SOLE DISCRETION",
        "title": "LEGAL DISCLAIMER"
      },
      {
        "category": "general",
        "text": "At Schneider, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment.\n\nWe provide energy and automation digital solutions for efficiency and sustainability. We combine world-leading energy technologies, real-time automation, software and services into integrated solutions for Homes, Buildings, Data Centers, Infrastructure and Industries.\n\nWe are committed to unleash the infinite possibilities of an open, global, innovative community that is passionate with our Meaningful Purpose, Inclusive and Empowered values.\n\nwww.se.com ",
        "title": "About Schneider Electric"
      },
      {
        "category": "summary",
        "text": "Schneider Electric is aware of a vulnerability in the Vijeo Designer and Vijeo Designer Basic \r\nSoftware products.",
        "title": "Overview"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "cpcert@se.com",
      "name": "Schneider Electric CPCERT",
      "namespace": "https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp"
    },
    "references": [
      {
        "category": "self",
        "summary": "Vijeo Designer and Vijeo Designer Basic - SEVD-2020-105-03 PDF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2020-105-03\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=SEVD-2020-105-03_Vijeo_Designer_and_Vijeo_Designer_Basic_Security_Notification_V1.2.pdf"
      },
      {
        "category": "self",
        "summary": "Vijeo Designer and Vijeo Designer Basic - SEVD-2020-105-03 CSAF Version",
        "url": "https://download.schneider-electric.com/files?p_Doc_Ref=SEVD-2020-105-03\u0026p_enDocType=Security+and+Safety+Notice\u0026p_File_Name=sevd-2020-105-03.json"
      },
      {
        "category": "external",
        "summary": "Recommended Cybersecurity Best Practices",
        "url": "https://www.se.com/us/en/download/document/7EN52-0390/"
      }
    ],
    "title": "Vijeo Designer and Vijeo Designer Basic",
    "tracking": {
      "current_release_date": "2020-08-11T00:00:00.000Z",
      "generator": {
        "date": "2020-08-11T00:00:00.000Z",
        "engine": {
          "name": "Schneider Electric CSAF Generator",
          "version": "1.2"
        }
      },
      "id": "SEVD-2020-105-03",
      "initial_release_date": "2020-04-14T00:00:00.000Z",
      "revision_history": [
        {
          "date": "2020-04-14T00:00:00.000Z",
          "number": "1.0.0",
          "summary": "Original Release"
        },
        {
          "date": "2020-04-30T00:00:00.000Z",
          "number": "1.1.0",
          "summary": "Corrected affected version of Vijeo Designer to\r\nV6.2 SP9 and prior (page 1)"
        },
        {
          "date": "2020-08-11T00:00:00.000Z",
          "number": "1.2.0",
          "summary": "Updated fix availability for Vijeo Designer V6.2 \r\nSP10 (page 1) "
        }
      ],
      "status": "final",
      "version": "1.2.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=1.1 HotFix 15",
                "product": {
                  "name": "Schneider Electric Vijeo Designer Basic V1.1 HotFix 15 and prior",
                  "product_id": "1"
                }
              }
            ],
            "category": "product_name",
            "name": "Vijeo Designer Basic"
          },
          {
            "branches": [
              {
                "category": "product_version_range",
                "name": "\u003c=6.2 SP9",
                "product": {
                  "name": "Schneider Electric Vijeo Designer V6.2 SP9 and prior",
                  "product_id": "2"
                }
              }
            ],
            "category": "product_name",
            "name": "Vijeo Designer"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "1.1 HotFix 16",
                "product": {
                  "name": "Schneider Electric Vijeo Designer Basic v1.1 HotFix 16",
                  "product_id": "3"
                }
              }
            ],
            "category": "product_name",
            "name": "Vijeo Designer Basic"
          },
          {
            "branches": [
              {
                "category": "product_version",
                "name": "6.2 SP10",
                "product": {
                  "name": "Schneider Electric Vijeo Designer v6.2 SP10",
                  "product_id": "4"
                }
              }
            ],
            "category": "product_name",
            "name": "Vijeo Designer"
          }
        ],
        "category": "vendor",
        "name": "Schneider Electric"
      }
    ]
  },
  "vulnerabilities": [
    {
      "acknowledgments": [
        {
          "names": [
            "Yongjun Liu"
          ],
          "organization": "nsfocus"
        }
      ],
      "cve": "CVE-2020-7490",
      "cwe": {
        "id": "CWE-426",
        "name": "Untrusted Search Path"
      },
      "notes": [
        {
          "category": "description",
          "text": "A CWE-426: Untrusted Search Path vulnerability exists, which could cause arbitrary code \r\nexecution on the system running Vijeo Basic when a malicious DLL library is loaded by the \r\nproduct.",
          "title": "CVE Description"
        }
      ],
      "product_status": {
        "fixed": [
          "3",
          "4"
        ],
        "known_affected": [
          "1",
          "2"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "This vulnerability is fixed in Vijeo Designer Basic version V1.1 HotFix 16. Please contact your \r\nSchneider Electric Customer Support to get Vijeo Designer Basic version V1.1 HotFix 16 \r\nsoftware. \r\nThis vulnerability is fixed in version Vijeo Designer V6.2 SP10 released in July 2020: \r\n\u2022 For customers using Vijeo Designer version V6.1 or earlier, please contact your \r\nSchneider Electric Customer Support to obtain the Vijeo Designer V6.2 SP10. \r\n\u2022 For customers using a version of Vijeo Designer V6.2 or greater, Vijeo Designer V6.2 \r\nSP10 will be automatically available in Schneider Electric Software Update (SESU) \r\nsoftware.",
          "product_ids": [
            "1",
            "2"
          ],
          "restart_required": {
            "category": "none"
          },
          "url": "https://www.se.com/ww/en/work/support/country-selector/contact-us.jsp"
        },
        {
          "category": "mitigation",
          "details": "The following workarounds and mitigations can be applied to Vijeo Designer Basic and Vijeo \r\nDesigner by customers to reduce the risk:\r\n Harden the Engineering Workstation - follow workstation, network, and site hardening \r\nguidelines in the Cybersecurity Best Practices guide available for download here.",
          "product_ids": [
            "1",
            "2"
          ],
          "restart_required": {
            "category": "none"
          }
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "attackComplexity": "HIGH",
            "attackVector": "LOCAL",
            "availabilityImpact": "HIGH",
            "baseScore": 6.7,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "HIGH",
            "environmentalScore": 6.7,
            "environmentalSeverity": "MEDIUM",
            "integrityImpact": "HIGH",
            "privilegesRequired": "LOW",
            "scope": "UNCHANGED",
            "temporalScore": 6.7,
            "temporalSeverity": "MEDIUM",
            "userInteraction": "REQUIRED",
            "vectorString": "CVSS:3.0/AV:L/AC:H/PR:L/UI:R/S:U/C:H/I:H/A:H",
            "version": "3.0"
          },
          "products": [
            "1",
            "2"
          ]
        }
      ],
      "title": "CVE-2020-7490"
    }
  ]
}