github - ghsa-x6c6-rqqc-c89m

ghsa-x6c6-rqqc-c89m

Vulnerability from github

Published

2022-05-24 22:33

Modified

2022-05-24 22:33

Severity ?

6.5 (Medium) - CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N

Details

Background For regular, unencrypted FTP traffic, the FTP ALG can inspect the unencrypted control channel and open related sessions for the FTP data channel. These related sessions (gates) are specific to source and destination IPs and ports of client and server. The design intent of the ftps-extensions option (which is disabled by default) is to provide similar functionality when the SRX secures the FTP/FTPS client. As the control channel is encrypted, the FTP ALG cannot inspect the port specific information and will open a wider TCP data channel (gate) from client IP to server IP on all destination TCP ports. In FTP/FTPS client environments to an enterprise network or the Internet, this is the desired behavior as it allows firewall policy to be written to FTP/FTPS servers on well-known control ports without using a policy with destination IP ANY and destination port ANY. Issue The ftps-extensions option is not intended or recommended where the SRX secures the FTPS server, as the wide data channel session (gate) will allow the FTPS client temporary access to all TCP ports on the FTPS server. The data session is associated to the control channel and will be closed when the control channel session closes. Depending on the configuration of the FTPS server, supporting load-balancer, and SRX inactivity-timeout values, the server/load-balancer and SRX may keep the control channel open for an extended period of time, allowing an FTPS client access for an equal duration. Note that the ftps-extensions option is not enabled by default.

Show details on source website

JSON

To clipboard

{
  "affected": [],
  "aliases": [
    "CVE-2015-5361"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-326"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2020-02-28T23:15:00Z",
    "severity": "MODERATE"
  },
  "details": "Background For regular, unencrypted FTP traffic, the FTP ALG can inspect the unencrypted control channel and open related sessions for the FTP data channel. These related sessions (gates) are specific to source and destination IPs and ports of client and server. The design intent of the ftps-extensions option (which is disabled by default) is to provide similar functionality when the SRX secures the FTP/FTPS client. As the control channel is encrypted, the FTP ALG cannot inspect the port specific information and will open a wider TCP data channel (gate) from client IP to server IP on all destination TCP ports. In FTP/FTPS client environments to an enterprise network or the Internet, this is the desired behavior as it allows firewall policy to be written to FTP/FTPS servers on well-known control ports without using a policy with destination IP ANY and destination port ANY. Issue The ftps-extensions option is not intended or recommended where the SRX secures the FTPS server, as the wide data channel session (gate) will allow the FTPS client temporary access to all TCP ports on the FTPS server. The data session is associated to the control channel and will be closed when the control channel session closes. Depending on the configuration of the FTPS server, supporting load-balancer, and SRX inactivity-timeout values, the server/load-balancer and SRX may keep the control channel open for an extended period of time, allowing an FTPS client access for an equal duration.\u200b Note that the ftps-extensions option is not enabled by default.",
  "id": "GHSA-x6c6-rqqc-c89m",
  "modified": "2022-05-24T22:33:54Z",
  "published": "2022-05-24T22:33:54Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2015-5361"
    },
    {
      "type": "WEB",
      "url": "https://kb.juniper.net/JSA10706"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
      "type": "CVSS_V3"
    }
  ]
}

cve-2015-5361

Vulnerability from cvelistv5

Published

2020-02-28 22:25

Modified

2024-09-16 16:39

Severity ?

6.5 (Medium) - CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N

Summary

References

▼	URL	Tags
	https://kb.juniper.net/JSA10706	x_refsource_CONFIRM

Impacted products

	Vendor	Product	Version
	n/a	n/a	Version: n/a

Show details on NVD website

JSON

To clipboard

{
  "containers": {
    "adp": [
      {
        "providerMetadata": {
          "dateUpdated": "2024-08-06T06:41:09.297Z",
          "orgId": "af854a3a-2127-422b-91ae-364da2661108",
          "shortName": "CVE"
        },
        "references": [
          {
            "tags": [
              "x_refsource_CONFIRM",
              "x_transferred"
            ],
            "url": "https://kb.juniper.net/JSA10706"
          }
        ],
        "title": "CVE Program Container"
      }
    ],
    "cna": {
      "affected": [
        {
          "product": "n/a",
          "vendor": "n/a",
          "versions": [
            {
              "status": "affected",
              "version": "n/a"
            }
          ]
        }
      ],
      "datePublic": "2015-10-14T00:00:00",
      "descriptions": [
        {
          "lang": "en",
          "value": "Background For regular, unencrypted FTP traffic, the FTP ALG can inspect the unencrypted control channel and open related sessions for the FTP data channel. These related sessions (gates) are specific to source and destination IPs and ports of client and server. The design intent of the ftps-extensions option (which is disabled by default) is to provide similar functionality when the SRX secures the FTP/FTPS client. As the control channel is encrypted, the FTP ALG cannot inspect the port specific information and will open a wider TCP data channel (gate) from client IP to server IP on all destination TCP ports. In FTP/FTPS client environments to an enterprise network or the Internet, this is the desired behavior as it allows firewall policy to be written to FTP/FTPS servers on well-known control ports without using a policy with destination IP ANY and destination port ANY. Issue The ftps-extensions option is not intended or recommended where the SRX secures the FTPS server, as the wide data channel session (gate) will allow the FTPS client temporary access to all TCP ports on the FTPS server. The data session is associated to the control channel and will be closed when the control channel session closes. Depending on the configuration of the FTPS server, supporting load-balancer, and SRX inactivity-timeout values, the server/load-balancer and SRX may keep the control channel open for an extended period of time, allowing an FTPS client access for an equal duration.\u200b Note that the ftps-extensions option is not enabled by default."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          }
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "description": "n/a",
              "lang": "en",
              "type": "text"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2022-08-22T21:35:09",
        "orgId": "8254265b-2729-46b6-b9e3-3dfca2d5bfca",
        "shortName": "mitre"
      },
      "references": [
        {
          "tags": [
            "x_refsource_CONFIRM"
          ],
          "url": "https://kb.juniper.net/JSA10706"
        }
      ],
      "solutions": [
        {
          "lang": "en",
          "value": "The overall behavior of the FTP ALG with the ftps-extensions option is intended behavior and will not change. The key component to this advisory is increasing user awareness of the wide TCP data channel (gate) creation, allowing creation of any new sessions from client to server, and potential implications where the SRX protects the FTPS server and the server/load-balancer allows the control channel to remain open for an extended period.\n\nInvestigation into the issue identified two issues applicable to environments where the SRX protects both FTPS clients and servers, as well as uses FTP and FTPS over the same TCP ports to different servers.\n\n\u200bDue to the recent changes of OpenSSL, the FTP ALG without the ftps-extensions option may block FTPS commands over the FTP control channel. This is client and server specific, and was observed with FTPS clients that use recent versions of OpenSSL. This may result in security administrators enabling the ftps-extensions option with the intent of allowing the commands to pass, but inadvertently allowing wide gate creation. This was observed in a configuration with simultaneous FTPS client/server use, with use of the same ports for FTP and FTPS traffic.\n\nThe ftps-extension option is not supported when the SRX performs a destination NAT of the FTPS server, as the ALG cannot inspect the control channel to modify the server\u2019s IP address signaled to the client. In an environment of simultaneous FTP and FTPS server use with the ftps-extensions option enabled, the gate is created but is generally unusable by the FTPS client. However, an FTPS client with knowledge of the server\u2019s real IP address, its NAT\u2019d IP address, and routing reachability to the server\u2019s real IP address may be able to use the wide gate to reach the FTPS server.\nThe software releases listed below resolves these issues as follows:\n\nThe FTP ALG without the ftps-extensions option will allow FTPS related commands to pass over the FTP control channel. As the ftps-extension option is not enabled, the wide TCP data channel is not created.\n\nIf the FTPS server is NAT\u2019d by the SRX (destination or static NAT), the wide TCP data channel is not created."
        },
        {
          "lang": "en",
          "value": "The following software releases have been updated to resolve these specific issues: Junos OS 12.1X44-D55, 12.1X46-D40, 12.1X47-D25, 12.3X48-D15, 15.1X49-D10, and all subsequent releases."
        }
      ],
      "source": {
        "advisory": "JSA10706",
        "defect": [
          "1067419"
        ],
        "discovery": "USER"
      },
      "title": "Junos: FTPS through SRX opens up wide range of data channel TCP ports",
      "workarounds": [
        {
          "lang": "en",
          "value": "Do not enable the \u0027ftps-extensions\u0027 option if FTPS is not needed.\u200b The \u0027ftps-extensions\u0027 option is disabled by default.\u200b"
        }
      ],
      "x_generator": {
        "engine": "Vulnogram 0.0.9"
      },
      "x_legacyV4Record": {
        "CVE_data_meta": {
          "ASSIGNER": "cve@mitre.org",
          "DATE_PUBLIC": "2015-10-14T16:00:00.000Z",
          "ID": "CVE-2015-5361",
          "STATE": "PUBLIC",
          "TITLE": "Junos: FTPS through SRX opens up wide range of data channel TCP ports"
        },
        "affects": {
          "vendor": {
            "vendor_data": [
              {
                "product": {
                  "product_data": [
                    {
                      "product_name": "n/a",
                      "version": {
                        "version_data": [
                          {
                            "version_value": "n/a"
                          }
                        ]
                      }
                    }
                  ]
                },
                "vendor_name": "n/a"
              }
            ]
          }
        },
        "data_format": "MITRE",
        "data_type": "CVE",
        "data_version": "4.0",
        "description": {
          "description_data": [
            {
              "lang": "eng",
              "value": "Background For regular, unencrypted FTP traffic, the FTP ALG can inspect the unencrypted control channel and open related sessions for the FTP data channel. These related sessions (gates) are specific to source and destination IPs and ports of client and server. The design intent of the ftps-extensions option (which is disabled by default) is to provide similar functionality when the SRX secures the FTP/FTPS client. As the control channel is encrypted, the FTP ALG cannot inspect the port specific information and will open a wider TCP data channel (gate) from client IP to server IP on all destination TCP ports. In FTP/FTPS client environments to an enterprise network or the Internet, this is the desired behavior as it allows firewall policy to be written to FTP/FTPS servers on well-known control ports without using a policy with destination IP ANY and destination port ANY. Issue The ftps-extensions option is not intended or recommended where the SRX secures the FTPS server, as the wide data channel session (gate) will allow the FTPS client temporary access to all TCP ports on the FTPS server. The data session is associated to the control channel and will be closed when the control channel session closes. Depending on the configuration of the FTPS server, supporting load-balancer, and SRX inactivity-timeout values, the server/load-balancer and SRX may keep the control channel open for an extended period of time, allowing an FTPS client access for an equal duration.\u200b Note that the ftps-extensions option is not enabled by default."
            }
          ]
        },
        "generator": {
          "engine": "Vulnogram 0.0.9"
        },
        "impact": {
          "cvss": {
            "attackComplexity": "LOW",
            "attackVector": "NETWORK",
            "availabilityImpact": "NONE",
            "baseScore": 6.5,
            "baseSeverity": "MEDIUM",
            "confidentialityImpact": "LOW",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N",
            "version": "3.1"
          }
        },
        "problemtype": {
          "problemtype_data": [
            {
              "description": [
                {
                  "lang": "eng",
                  "value": "n/a"
                }
              ]
            }
          ]
        },
        "references": {
          "reference_data": [
            {
              "name": "https://kb.juniper.net/JSA10706",
              "refsource": "CONFIRM",
              "url": "https://kb.juniper.net/JSA10706"
            }
          ]
        },
        "solution": [
          {
            "lang": "en",
            "value": "The overall behavior of the FTP ALG with the ftps-extensions option is intended behavior and will not change. The key component to this advisory is increasing user awareness of the wide TCP data channel (gate) creation, allowing creation of any new sessions from client to server, and potential implications where the SRX protects the FTPS server and the server/load-balancer allows the control channel to remain open for an extended period.\n\nInvestigation into the issue identified two issues applicable to environments where the SRX protects both FTPS clients and servers, as well as uses FTP and FTPS over the same TCP ports to different servers.\n\n\u200bDue to the recent changes of OpenSSL, the FTP ALG without the ftps-extensions option may block FTPS commands over the FTP control channel. This is client and server specific, and was observed with FTPS clients that use recent versions of OpenSSL. This may result in security administrators enabling the ftps-extensions option with the intent of allowing the commands to pass, but inadvertently allowing wide gate creation. This was observed in a configuration with simultaneous FTPS client/server use, with use of the same ports for FTP and FTPS traffic.\n\nThe ftps-extension option is not supported when the SRX performs a destination NAT of the FTPS server, as the ALG cannot inspect the control channel to modify the server\u2019s IP address signaled to the client. In an environment of simultaneous FTP and FTPS server use with the ftps-extensions option enabled, the gate is created but is generally unusable by the FTPS client. However, an FTPS client with knowledge of the server\u2019s real IP address, its NAT\u2019d IP address, and routing reachability to the server\u2019s real IP address may be able to use the wide gate to reach the FTPS server.\nThe software releases listed below resolves these issues as follows:\n\nThe FTP ALG without the ftps-extensions option will allow FTPS related commands to pass over the FTP control channel. As the ftps-extension option is not enabled, the wide TCP data channel is not created.\n\nIf the FTPS server is NAT\u2019d by the SRX (destination or static NAT), the wide TCP data channel is not created."
          },
          {
            "lang": "en",
            "value": "The following software releases have been updated to resolve these specific issues: Junos OS 12.1X44-D55, 12.1X46-D40, 12.1X47-D25, 12.3X48-D15, 15.1X49-D10, and all subsequent releases."
          }
        ],
        "source": {
          "advisory": "JSA10706",
          "defect": [
            "1067419"
          ],
          "discovery": "USER"
        },
        "work_around": [
          {
            "lang": "en",
            "value": "Do not enable the \u0027ftps-extensions\u0027 option if FTPS is not needed.\u200b The \u0027ftps-extensions\u0027 option is disabled by default.\u200b"
          }
        ]
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "8254265b-2729-46b6-b9e3-3dfca2d5bfca",
    "assignerShortName": "mitre",
    "cveId": "CVE-2015-5361",
    "datePublished": "2020-02-28T22:25:24.967247Z",
    "dateReserved": "2015-07-01T00:00:00",
    "dateUpdated": "2024-09-16T16:39:13.197Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

Sightings

Author	Source	Type	Date

Nomenclature

Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
Confirmed: The vulnerability is confirmed from an analyst perspective.
Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
Patched: This vulnerability was successfully patched by the user reporting the sighting.
Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
Not confirmed: The user expresses doubt about the veracity of the vulnerability.
Not patched: This vulnerability was not successfully patched by the user reporting the sighting.

Action not permitted