FKIE_CVE-2026-64363
Vulnerability from fkie_nvd - Published: 2026-07-25 10:17 - Updated: 2026-09-04 15:56
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced.
References
Impacted products
| Vendor | Product | Version | |
|---|---|---|---|
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | 7.2 | |
| linux | linux_kernel | 7.2 |
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/hid/hid-appleir.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "89ef67359672bf4cd6921524e39f61648fe38c0f",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "3d30a0bb0e79621ae921b487835c56198adfafa3",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "37a52c61d4f78153c38ae1f7491dfcc8ac828dcf",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "05e3decc55d1deca9410e0eb36466651fcbe57a5",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "3755f6e25776b8b12ddf062f9b573f05090e4034",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "b363d964ca829c1761c9f04188dfa28f90b0f2d4",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "6b0838e86da88b1d3bff86f19761ff25af73eaca",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
},
{
"lessThan": "75fe87e19d8aff81eb2c64d15d244ab8da4de945",
"status": "affected",
"version": "9a4a5574ce427c364d81746fc7fb82d86b5f1a7e",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/hid/hid-appleir.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "3.10"
},
{
"lessThan": "3.10",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.261",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.212",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.178",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.145",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.97",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.39",
"versionType": "semver"
},
{
"lessThanOrEqual": "7.1.*",
"status": "unaffected",
"version": "7.1.4",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.2",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "BED8D10B-8186-4ED0-9DD4-D85DE9904B36",
"versionEndExcluding": "5.10.261",
"versionStartIncluding": "3.10",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "8E99FB01-CD93-41AF-A653-3F450652B9A6",
"versionEndExcluding": "5.15.212",
"versionStartIncluding": "5.11",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "092233C7-F4E0-40C8-BD4D-A28FE50DFE20",
"versionEndExcluding": "6.1.178",
"versionStartIncluding": "5.16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "7046B092-F810-4440-ACE6-60218518EECE",
"versionEndExcluding": "6.6.145",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "05880CF6-5AD2-44E9-853A-6CE8318E76A5",
"versionEndExcluding": "6.12.97",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "914AE4BC-3D59-4C5A-9DB5-9CE327B429F7",
"versionEndExcluding": "6.18.39",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "6228DDD6-4557-4AA3-9F43-AB995D471E42",
"versionEndExcluding": "7.1.4",
"versionStartIncluding": "6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.2:rc1:*:*:*:*:*:*",
"matchCriteriaId": "5E8B9085-7ADB-4A05-89EF-12949B6A0509",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.2:rc2:*:*:*:*:*:*",
"matchCriteriaId": "1FC0D50D-9D58-4947-A197-A5A3FF07E7E3",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nHID: appleir: fix UAF on pending key_up_timer in remove()\n\nappleir_remove() runs hid_hw_stop() before timer_delete_sync().\nhid_hw_stop() synchronously unregisters the HID input device via\nhid_disconnect() -\u003e hidinput_disconnect() -\u003e input_unregister_device(),\nwhich drops the last reference and frees the underlying input_dev when\nno userspace handle holds it open.\n\nkey_up_tick() reads appleir-\u003einput_dev and calls input_report_key() /\ninput_sync() on it. The timer is armed from appleir_raw_event() with\na HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a\nkey was pressed shortly before the device is disconnected, the timer\ncan fire after hid_hw_stop() has freed input_dev but before the\nteardown drains it.\n\nA simple reorder is not sufficient. Putting the timer drain first\nstill leaves a window where a USB URB completion (raw_event) running\nduring hid_hw_stop() can call mod_timer() and re-arm the timer, which\nthen fires after hidinput_disconnect() has freed input_dev. The same\nURB-completion window also lets raw_event() reach key_up(), key_down()\nand battery_flat() directly, all of which dereference\nappleir-\u003einput_dev.\n\nIntroduce a \u0027removing\u0027 flag on struct appleir, gated by the existing\nspinlock. appleir_remove() sets the flag under the lock and then\nshuts down the timer with timer_shutdown_sync(), which both drains any\nin-flight callback and permanently disables further mod_timer() calls.\nappleir_raw_event() and key_up_tick() bail out early if the flag is\nset, so no path can arm or run the timer, or dereference\nappleir-\u003einput_dev, after remove() has started tearing down.\n\nThe keyrepeat and flatbattery branches of appleir_raw_event()\npreviously called into the input layer without holding the spinlock;\ntake it now so the flag check is well-defined. This incidentally\ncloses a pre-existing read-side race on appleir-\u003ecurrent_key in the\nkeyrepeat branch.\n\nThis bug is structurally a sibling of commit 4db2af929279 (\"HID:\nappletb-kbd: fix UAF in inactivity-timer cleanup path\") and has been\npresent since the driver was introduced."
}
],
"id": "CVE-2026-64363",
"lastModified": "2026-09-04T15:56:32.810",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "nvd@nist.gov",
"type": "Primary"
}
]
},
"published": "2026-07-25T10:17:18.960",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/05e3decc55d1deca9410e0eb36466651fcbe57a5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/3755f6e25776b8b12ddf062f9b573f05090e4034"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/37a52c61d4f78153c38ae1f7491dfcc8ac828dcf"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/3d30a0bb0e79621ae921b487835c56198adfafa3"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/6b0838e86da88b1d3bff86f19761ff25af73eaca"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/75fe87e19d8aff81eb2c64d15d244ab8da4de945"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/89ef67359672bf4cd6921524e39f61648fe38c0f"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/b363d964ca829c1761c9f04188dfa28f90b0f2d4"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Analyzed",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-416"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Loading…
Loading…