GCVE Workshop - 22 September 2026 (14:00-18:00), Luxembourg Before The Vulnopticon Conference - Registration

FKIE_CVE-2026-64351

Vulnerability from fkie_nvd - Published: 2026-07-25 10:17 - Updated: 2026-09-03 16:03
Summary
In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.

{
  "affected": [
    {
      "affectedData": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/usb/kalmia.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "391706889a5112feafdc0c68db3ecc7ed325d09c",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "aa4eef2cbb66ea3dfcfc24bdce798dd78a81b54b",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "2d04c37ed4e1d0f733ad39ec35b5a5d8818b4f4a",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "46ab32870d010e9a057bc5659cea22b7e728ca88",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "c466097d85d52f3aa200736cb4759e66d4bbf6e3",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "e24eb271061db384a3c3ef6f107fe515e68ef222",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "51e65f1d78457ea4f9513d90ab22c9dccbb35110",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            },
            {
              "lessThan": "47b6bcef6e679593d2e86e04ee72c46a4e2f7139",
              "status": "affected",
              "version": "d40261236e8e278cb1936cb5e934262971692b10",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/net/usb/kalmia.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "3.0"
            },
            {
              "lessThan": "3.0",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.261",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.212",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.178",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.145",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.96",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.39",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.1.*",
              "status": "unaffected",
              "version": "7.1.4",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.2",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
    }
  ],
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "9905F47B-E6B2-4F1D-912C-77802FD1CFD4",
              "versionEndExcluding": "5.10.261",
              "versionStartIncluding": "3.0.1",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "8E99FB01-CD93-41AF-A653-3F450652B9A6",
              "versionEndExcluding": "5.15.212",
              "versionStartIncluding": "5.11",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "092233C7-F4E0-40C8-BD4D-A28FE50DFE20",
              "versionEndExcluding": "6.1.178",
              "versionStartIncluding": "5.16",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "7046B092-F810-4440-ACE6-60218518EECE",
              "versionEndExcluding": "6.6.145",
              "versionStartIncluding": "6.2",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "38A8100E-2B1A-462F-AEE9-8901B870FEF2",
              "versionEndExcluding": "6.12.96",
              "versionStartIncluding": "6.7",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "914AE4BC-3D59-4C5A-9DB5-9CE327B429F7",
              "versionEndExcluding": "6.18.39",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "6228DDD6-4557-4AA3-9F43-AB995D471E42",
              "versionEndExcluding": "7.1.4",
              "versionStartIncluding": "6.19",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.0:-:*:*:*:*:*:*",
              "matchCriteriaId": "2E4912EC-CC92-41CA-A2DA-027291975A84",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.0:rc4:*:*:*:*:*:*",
              "matchCriteriaId": "53BCFBFB-6AF0-4525-8623-7633CC5E17DB",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.0:rc5:*:*:*:*:*:*",
              "matchCriteriaId": "6ED4E86A-74F0-436A-BEB4-3F4EE93A5421",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.0:rc6:*:*:*:*:*:*",
              "matchCriteriaId": "BF0365B0-8E16-4F30-BD92-5DD538CC8135",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:3.0:rc7:*:*:*:*:*:*",
              "matchCriteriaId": "079505E8-2942-4C33-93D1-35ADA4C39E72",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: usb: kalmia: bound RX frame length in kalmia_rx_fixup()\n\nkalmia_rx_fixup() computes usb_packet_length = skb-\u003elen - (2 *\nKALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that\nskb-\u003elen is at least KALMIA_HEADER_LENGTH, which is 6. A device can\ndeliver a short bulk-IN frame with skb-\u003elen in the 6 to 11 range, or\nleave a short trailing remainder on a later loop iteration. Either case\nunderflows usb_packet_length to about 65530.\n\nThat bypasses the usb_packet_length \u003c ether_packet_length truncation path.\nThe device-supplied ether_packet_length, a le16 up to 65535 read from\nheader_start[2], then drives a memcmp() and the following skb_trim() and\nskb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10,\nwhich is 14000 bytes. That is an out of bounds read.\n\nRequire both the start and end framing headers to be present before\nsubtracting them, on every loop iteration."
    }
  ],
  "id": "CVE-2026-64351",
  "lastModified": "2026-09-03T16:03:31.400",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 5.5,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 3.6,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2026-07-25T10:17:17.407",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/2d04c37ed4e1d0f733ad39ec35b5a5d8818b4f4a"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/391706889a5112feafdc0c68db3ecc7ed325d09c"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/46ab32870d010e9a057bc5659cea22b7e728ca88"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/47b6bcef6e679593d2e86e04ee72c46a4e2f7139"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/51e65f1d78457ea4f9513d90ab22c9dccbb35110"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/aa4eef2cbb66ea3dfcfc24bdce798dd78a81b54b"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/c466097d85d52f3aa200736cb4759e66d4bbf6e3"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/e24eb271061db384a3c3ef6f107fe515e68ef222"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…

Loading…