fkie_cve-2024-56649
Vulnerability from fkie_nvd
Published
2024-12-27 15:15
Modified
2025-01-06 19:50
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
net: enetc: Do not configure preemptible TCs if SIs do not support
Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure
MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()
to configure preemptible TCs. However, only PF is able to configure
preemptible TCs. Because only PF has related registers, while VF does not
have these registers. So for VF, its hw->port pointer is NULL. Therefore,
VF will access an invalid pointer when accessing a non-existent register,
which will cause a crash issue. The simplified log is as follows.
root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[ 187.511140] Call trace:
[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214
[ 187.523374] enetc_vf_setup_tc+0x1c/0x30
[ 187.527306] mqprio_enable_offload+0x144/0x178
[ 187.531766] mqprio_init+0x3ec/0x668
[ 187.535351] qdisc_create+0x15c/0x488
[ 187.539023] tc_modify_qdisc+0x398/0x73c
[ 187.542958] rtnetlink_rcv_msg+0x128/0x378
[ 187.547064] netlink_rcv_skb+0x60/0x130
[ 187.550910] rtnetlink_rcv+0x18/0x24
[ 187.554492] netlink_unicast+0x300/0x36c
[ 187.558425] netlink_sendmsg+0x1a8/0x420
[ 187.606759] ---[ end trace 0000000000000000 ]---
In addition, some PFs also do not support configuring preemptible TCs,
such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs,
but we should prevent these PFs from accessing these unimplemented
registers.
References
Impacted products
Vendor | Product | Version | |
---|---|---|---|
linux | linux_kernel | * | |
linux | linux_kernel | * | |
linux | linux_kernel | 6.13 |
{ "configurations": [ { "nodes": [ { "cpeMatch": [ { "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "26B700EE-A79C-4047-8214-099FACC0BEB5", "versionEndExcluding": "6.6.66", "versionStartIncluding": "6.4", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "9501D045-7A94-42CA-8B03-821BE94A65B7", "versionEndExcluding": "6.12.5", "versionStartIncluding": "6.7", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.13:rc1:*:*:*:*:*:*", "matchCriteriaId": "62567B3C-6CEE-46D0-BC2E-B3717FBF7D13", "vulnerable": true } ], "negate": false, "operator": "OR" } ] } ], "cveTags": [], "descriptions": [ { "lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: enetc: Do not configure preemptible TCs if SIs do not support\n\nBoth ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure\nMQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()\nto configure preemptible TCs. However, only PF is able to configure\npreemptible TCs. Because only PF has related registers, while VF does not\nhave these registers. So for VF, its hw-\u003eport pointer is NULL. Therefore,\nVF will access an invalid pointer when accessing a non-existent register,\nwhich will cause a crash issue. The simplified log is as follows.\n\nroot@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \\\nmqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1\n[ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00\n[ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400\n[ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400\n[ 187.511140] Call trace:\n[ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400\n[ 187.518918] enetc_setup_tc_mqprio+0x180/0x214\n[ 187.523374] enetc_vf_setup_tc+0x1c/0x30\n[ 187.527306] mqprio_enable_offload+0x144/0x178\n[ 187.531766] mqprio_init+0x3ec/0x668\n[ 187.535351] qdisc_create+0x15c/0x488\n[ 187.539023] tc_modify_qdisc+0x398/0x73c\n[ 187.542958] rtnetlink_rcv_msg+0x128/0x378\n[ 187.547064] netlink_rcv_skb+0x60/0x130\n[ 187.550910] rtnetlink_rcv+0x18/0x24\n[ 187.554492] netlink_unicast+0x300/0x36c\n[ 187.558425] netlink_sendmsg+0x1a8/0x420\n[ 187.606759] ---[ end trace 0000000000000000 ]---\n\nIn addition, some PFs also do not support configuring preemptible TCs,\nsuch as eno1 and eno3 on LS1028A. It won\u0027t crash like it does for VFs,\nbut we should prevent these PFs from accessing these unimplemented\nregisters." }, { "lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net: enetc: No configure TC preemptibles si los SI no son compatibles Ambos controladores ENETC PF y VF comparten enetc_setup_tc_mqprio() para configurar MQPRIO. Y enetc_setup_tc_mqprio() llama a enetc_change_preemptible_tcs() para configurar TC preemptibles. Sin embargo, solo PF puede configurar TC preemptibles. Porque solo PF tiene registros relacionados, mientras que VF no tiene estos registros. Entonces, para VF, su puntero hw-\u0026gt;port es NULL. Por lo tanto, VF acceder\u00e1 a un puntero no v\u00e1lido cuando acceda a un registro inexistente, lo que provocar\u00e1 un problema de bloqueo. El registro simplificado es el siguiente. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \\ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] No se puede gestionar la solicitud de paginaci\u00f3n del n\u00facleo en la direcci\u00f3n virtual 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Rastreo de llamada: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ fin de seguimiento 0000000000000000 ]--- Adem\u00e1s, algunos PF tampoco admiten la configuraci\u00f3n de TC interrumpibles, como eno1 y eno3 en LS1028A. No se bloquear\u00e1 como ocurre con los VF, pero debemos evitar que estos PF accedan a estos registros no implementados." } ], "id": "CVE-2024-56649", "lastModified": "2025-01-06T19:50:58.263", "metrics": { "cvssMetricV31": [ { "cvssData": { "attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1" }, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary" } ] }, "published": "2024-12-27T15:15:24.680", "references": [ { "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/66127f0d1ecf00604aeab71132bde398fd9ec7c9" }, { "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/b2420b8c81ec674552d00c55d46245e5c184b260" }, { "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/b718b68a9964181e24d15138a09ce95785a19002" } ], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [ { "description": [ { "lang": "en", "value": "CWE-476" } ], "source": "nvd@nist.gov", "type": "Primary" } ] }
Loading…
Loading…
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.