fkie_cve-2024-53097
Vulnerability from fkie_nvd
Published
2024-11-25 22:15
Modified
2024-12-24 15:44
Severity ?
5.5 (Medium) - CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Summary
In the Linux kernel, the following vulnerability has been resolved: mm: krealloc: Fix MTE false alarm in __do_krealloc This patch addresses an issue introduced by commit 1a83a716ec233 ("mm: krealloc: consider spare memory for __GFP_ZERO") which causes MTE (Memory Tagging Extension) to falsely report a slab-out-of-bounds error. The problem occurs when zeroing out spare memory in __do_krealloc. The original code only considered software-based KASAN and did not account for MTE. It does not reset the KASAN tag before calling memset, leading to a mismatch between the pointer tag and the memory tag, resulting in a false positive. Example of the error: ================================================================== swapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188 swapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1 swapper/0: Pointer tag: [f4], memory tag: [fe] swapper/0: swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12. swapper/0: Hardware name: MT6991(ENG) (DT) swapper/0: Call trace: swapper/0: dump_backtrace+0xfc/0x17c swapper/0: show_stack+0x18/0x28 swapper/0: dump_stack_lvl+0x40/0xa0 swapper/0: print_report+0x1b8/0x71c swapper/0: kasan_report+0xec/0x14c swapper/0: __do_kernel_fault+0x60/0x29c swapper/0: do_bad_area+0x30/0xdc swapper/0: do_tag_check_fault+0x20/0x34 swapper/0: do_mem_abort+0x58/0x104 swapper/0: el1_abort+0x3c/0x5c swapper/0: el1h_64_sync_handler+0x80/0xcc swapper/0: el1h_64_sync+0x68/0x6c swapper/0: __memset+0x84/0x188 swapper/0: btf_populate_kfunc_set+0x280/0x3d8 swapper/0: __register_btf_kfunc_id_set+0x43c/0x468 swapper/0: register_btf_kfunc_id_set+0x48/0x60 swapper/0: register_nf_nat_bpf+0x1c/0x40 swapper/0: nf_nat_init+0xc0/0x128 swapper/0: do_one_initcall+0x184/0x464 swapper/0: do_initcall_level+0xdc/0x1b0 swapper/0: do_initcalls+0x70/0xc0 swapper/0: do_basic_setup+0x1c/0x28 swapper/0: kernel_init_freeable+0x144/0x1b8 swapper/0: kernel_init+0x20/0x1a8 swapper/0: ret_from_fork+0x10/0x20 ==================================================================
References
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/3dfb40da84f26dd35dd9bbaf626a2424565b8406Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/486aeb5f1855c75dd810c25036134961bd2a6722Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/704573851b51808b45dae2d62059d1d8189138a2Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/71548fada7ee0eb50cc6ccda82dff010c745f92cPatch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/8ebee7565effdeae6085458f8f8463363120a871Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/d02492863023431c31f85d570f718433c22b9311Patch
416baaa9-dc9f-4396-8d5f-8c081fb06d67https://git.kernel.org/stable/c/d43f1430d47c22a0727c05b6f156ed25fecdfeb4Patch
Impacted products
Vendor Product Version
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel *
linux linux_kernel 6.10.14


To clipboard 

{
   configurations: [
      {
         nodes: [
            {
               cpeMatch: [
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                     matchCriteriaId: "3546841B-07B8-4997-A4AD-1EC788256AF0",
                     versionEndExcluding: "5.10.230",
                     versionStartIncluding: "5.10.227",
                     vulnerable: true,
                  },
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                     matchCriteriaId: "B3C4D92D-9E65-4C21-AF70-5AC493F239EF",
                     versionEndExcluding: "5.15.173",
                     versionStartIncluding: "5.15.168",
                     vulnerable: true,
                  },
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                     matchCriteriaId: "7C53F2A0-0C57-484C-9CE8-EC3EC63EC52B",
                     versionEndExcluding: "6.1.118",
                     versionStartIncluding: "6.1.113",
                     vulnerable: true,
                  },
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                     matchCriteriaId: "C41517DE-EF01-4A67-961A-7BA6F46D422A",
                     versionEndExcluding: "6.6.62",
                     versionStartIncluding: "6.6.55",
                     vulnerable: true,
                  },
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                     matchCriteriaId: "DFC4E34A-A453-4E5B-B4B8-A80AC8442771",
                     versionEndExcluding: "6.11.9",
                     versionStartIncluding: "6.11.3",
                     vulnerable: true,
                  },
                  {
                     criteria: "cpe:2.3:o:linux:linux_kernel:6.10.14:*:*:*:*:*:*:*",
                     matchCriteriaId: "512B17C9-99F8-4C34-965E-0E2384EEB665",
                     vulnerable: true,
                  },
               ],
               negate: false,
               operator: "OR",
            },
         ],
      },
   ],
   cveTags: [],
   descriptions: [
      {
         lang: "en",
         value: "In the Linux kernel, the following vulnerability has been resolved:\n\nmm: krealloc: Fix MTE false alarm in __do_krealloc\n\nThis patch addresses an issue introduced by commit 1a83a716ec233 (\"mm:\nkrealloc: consider spare memory for __GFP_ZERO\") which causes MTE\n(Memory Tagging Extension) to falsely report a slab-out-of-bounds error.\n\nThe problem occurs when zeroing out spare memory in __do_krealloc. The\noriginal code only considered software-based KASAN and did not account\nfor MTE. It does not reset the KASAN tag before calling memset, leading\nto a mismatch between the pointer tag and the memory tag, resulting\nin a false positive.\n\nExample of the error:\n==================================================================\nswapper/0: BUG: KASAN: slab-out-of-bounds in __memset+0x84/0x188\nswapper/0: Write at addr f4ffff8005f0fdf0 by task swapper/0/1\nswapper/0: Pointer tag: [f4], memory tag: [fe]\nswapper/0:\nswapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.\nswapper/0: Hardware name: MT6991(ENG) (DT)\nswapper/0: Call trace:\nswapper/0:  dump_backtrace+0xfc/0x17c\nswapper/0:  show_stack+0x18/0x28\nswapper/0:  dump_stack_lvl+0x40/0xa0\nswapper/0:  print_report+0x1b8/0x71c\nswapper/0:  kasan_report+0xec/0x14c\nswapper/0:  __do_kernel_fault+0x60/0x29c\nswapper/0:  do_bad_area+0x30/0xdc\nswapper/0:  do_tag_check_fault+0x20/0x34\nswapper/0:  do_mem_abort+0x58/0x104\nswapper/0:  el1_abort+0x3c/0x5c\nswapper/0:  el1h_64_sync_handler+0x80/0xcc\nswapper/0:  el1h_64_sync+0x68/0x6c\nswapper/0:  __memset+0x84/0x188\nswapper/0:  btf_populate_kfunc_set+0x280/0x3d8\nswapper/0:  __register_btf_kfunc_id_set+0x43c/0x468\nswapper/0:  register_btf_kfunc_id_set+0x48/0x60\nswapper/0:  register_nf_nat_bpf+0x1c/0x40\nswapper/0:  nf_nat_init+0xc0/0x128\nswapper/0:  do_one_initcall+0x184/0x464\nswapper/0:  do_initcall_level+0xdc/0x1b0\nswapper/0:  do_initcalls+0x70/0xc0\nswapper/0:  do_basic_setup+0x1c/0x28\nswapper/0:  kernel_init_freeable+0x144/0x1b8\nswapper/0:  kernel_init+0x20/0x1a8\nswapper/0:  ret_from_fork+0x10/0x20\n==================================================================",
      },
      {
         lang: "es",
         value: "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: mm: krealloc: corrige la falsa alarma de MTE en __do_krealloc Este parche soluciona un problema introducido por el commit 1a83a716ec233 (\"mm: krealloc: considere la memoria de repuesto para __GFP_ZERO\") que hace que MTE (extensión de etiquetado de memoria) informe falsamente un error de losa fuera de los límites. El problema ocurre al poner a cero la memoria de repuesto en __do_krealloc. El código original solo consideraba KASAN basado en software y no tenía en cuenta MTE. No restablece la etiqueta KASAN antes de llamar a memset, lo que lleva a una falta de coincidencia entre la etiqueta del puntero y la etiqueta de memoria, lo que resulta en un falso positivo. Ejemplo del error: ================================================================== swapper/0: ERROR: KASAN: slab fuera de los límites en __memset+0x84/0x188 swapper/0: Escritura en la dirección f4ffff8005f0fdf0 por la tarea swapper/0/1 swapper/0: Etiqueta de puntero: [f4], etiqueta de memoria: [fe] swapper/0: swapper/0: CPU: 4 UID: 0 PID: 1 Comm: swapper/0 No contaminado 6.12. swapper/0: Nombre del hardware: MT6991(ENG) (DT) swapper/0: Rastreo de llamadas: swapper/0: dump_backtrace+0xfc/0x17c swapper/0: show_stack+0x18/0x28 swapper/0: dump_stack_lvl+0x40/0xa0 swapper/0: print_report+0x1b8/0x71c swapper/0: kasan_report+0xec/0x14c swapper/0: __do_kernel_fault+0x60/0x29c swapper/0: do_bad_area+0x30/0xdc swapper/0: do_tag_check_fault+0x20/0x34 swapper/0: do_mem_abort+0x58/0x104 swapper/0: el1_abort+0x3c/0x5c intercambiador/0: el1h_64_sync_handler+0x80/0xcc intercambiador/0: el1h_64_sync+0x68/0x6c intercambiador/0: __memset+0x84/0x188 intercambiador/0: btf_populate_kfunc_set+0x280/0x3d8 intercambiador/0: __register_btf_kfunc_id_set+0x43c/0x468 intercambiador/0: register_btf_kfunc_id_set+0x48/0x60 intercambiador/0: register_nf_nat_bpf+0x1c/0x40 intercambiador/0: nf_nat_init+0xc0/0x128 intercambiador/0: do_one_initcall+0x184/0x464 intercambiador/0: do_initcall_level+0xdc/0x1b0 intercambiador/0: do_initcalls+0x70/0xc0 intercambiador/0: do_basic_setup+0x1c/0x28 intercambiador/0: kernel_init_freeable+0x144/0x1b8 intercambiador/0: kernel_init+0x20/0x1a8 intercambiador/0: ret_from_fork+0x10/0x20 ====================================================================",
      },
   ],
   id: "CVE-2024-53097",
   lastModified: "2024-12-24T15:44:19.850",
   metrics: {
      cvssMetricV31: [
         {
            cvssData: {
               attackComplexity: "LOW",
               attackVector: "LOCAL",
               availabilityImpact: "HIGH",
               baseScore: 5.5,
               baseSeverity: "MEDIUM",
               confidentialityImpact: "NONE",
               integrityImpact: "NONE",
               privilegesRequired: "LOW",
               scope: "UNCHANGED",
               userInteraction: "NONE",
               vectorString: "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
               version: "3.1",
            },
            exploitabilityScore: 1.8,
            impactScore: 3.6,
            source: "nvd@nist.gov",
            type: "Primary",
         },
      ],
   },
   published: "2024-11-25T22:15:15.763",
   references: [
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/3dfb40da84f26dd35dd9bbaf626a2424565b8406",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/486aeb5f1855c75dd810c25036134961bd2a6722",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/704573851b51808b45dae2d62059d1d8189138a2",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/71548fada7ee0eb50cc6ccda82dff010c745f92c",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/8ebee7565effdeae6085458f8f8463363120a871",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/d02492863023431c31f85d570f718433c22b9311",
      },
      {
         source: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
         tags: [
            "Patch",
         ],
         url: "https://git.kernel.org/stable/c/d43f1430d47c22a0727c05b6f156ed25fecdfeb4",
      },
   ],
   sourceIdentifier: "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
   vulnStatus: "Analyzed",
   weaknesses: [
      {
         description: [
            {
               lang: "en",
               value: "NVD-CWE-noinfo",
            },
         ],
         source: "nvd@nist.gov",
         type: "Primary",
      },
   ],
}


Log in or create an account to share your comment.

Security Advisory comment format.

This schema specifies the format of a comment related to a security advisory.

UUIDv4 of the comment
UUIDv4 of the Vulnerability-Lookup instance
When the comment was created originally
When the comment was last updated
Title of the comment
Description of the comment
The identifier of the vulnerability (CVE ID, GHSA-ID, PYSEC ID, etc.).



Tags
Taxonomy of the tags.




Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.