CVE-2026-16147 (GCVE-0-2026-16147)
Vulnerability from cvelistv5 – Published: 2026-09-14 19:33 – Updated: 2026-09-14 20:05
VLAI
EPSS
VEX
Title
it82xx2 USB device controller submits incomplete OUT transfer buffers, causing use-after-free and event-list corruption
Summary
The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event().
Because udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends &buf->node to uds_ctx->ep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled — a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending &buf->node to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref().
The IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet — an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once.
Severity
6.8 (Medium)
SSVC
Exploitation: none
Automatable: no
Technical Impact: total
CISA Coordinator · CISA-ADP (v2.0.3)
Decision recorded 2026-09-14 20:04 UTC
CWE
- CWE-416 - use-after-free
Assigner
References
2 references
Impacted products
1 product
| Vendor | Product | Version | CPE status | |
|---|---|---|---|---|
| zephyrproject | zephyr |
Affected:
4.0.0 , < 4.4.2
(semver)
|
guessed |
{
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-16147",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-14T20:04:57.852432Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-14T20:05:14.713Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/usb/udc/udc_it82xx2.c"
],
"programRoutines": [
{
"name": "work_handler_out"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event().\n\nBecause udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends \u0026buf-\u003enode to uds_ctx-\u003eep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled \u2014 a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending \u0026buf-\u003enode to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref().\n\nThe IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet \u2014 an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 6.8,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-416",
"description": "use-after-free",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-14T19:33:46.303Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/2abc3088a6598579cf322452801a13cb0ec57b0e"
},
{
"name": "GHSA-3q4g-7w6j-8qfp",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3q4g-7w6j-8qfp"
}
],
"title": "it82xx2 USB device controller submits incomplete OUT transfer buffers, causing use-after-free and event-list corruption",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-16147",
"datePublished": "2026-09-14T19:33:46.303Z",
"dateReserved": "2026-07-17T18:21:31.577Z",
"dateUpdated": "2026-09-14T20:05:14.713Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2",
"vulnerability-lookup:meta": {
"epss": {
"cve": "CVE-2026-16147",
"date": "2026-09-18",
"epss": "0.00182",
"percentile": "0.08053"
},
"nvd": {
"cve": {
"affected": [
{
"affectedData": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/usb/udc/udc_it82xx2.c"
],
"programRoutines": [
{
"name": "work_handler_out"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
}
]
}
],
"source": "vulnerabilities@zephyrproject.org"
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event().\n\nBecause udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends \u0026buf-\u003enode to uds_ctx-\u003eep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled \u2014 a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending \u0026buf-\u003enode to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref().\n\nThe IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet \u2014 an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once."
}
],
"id": "CVE-2026-16147",
"lastModified": "2026-09-14T21:10:41.650",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "PHYSICAL",
"availabilityImpact": "HIGH",
"baseScore": 6.8,
"baseSeverity": "MEDIUM",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "NONE",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 0.9,
"impactScore": 5.9,
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
],
"ssvcV203": [
{
"source": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"ssvcData": {
"id": "CVE-2026-16147",
"options": [
{
"exploitation": "none"
},
{
"automatable": "no"
},
{
"technicalImpact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-14T20:04:57.852432Z",
"version": "2.0.3"
}
}
]
},
"published": "2026-09-14T20:16:39.207",
"references": [
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/2abc3088a6598579cf322452801a13cb0ec57b0e"
},
{
"source": "vulnerabilities@zephyrproject.org",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3q4g-7w6j-8qfp"
}
],
"sourceIdentifier": "vulnerabilities@zephyrproject.org",
"vulnStatus": "Awaiting Analysis",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-416"
}
],
"source": "vulnerabilities@zephyrproject.org",
"type": "Secondary"
}
]
}
},
"vulnrichment": {
"containers": {
"adp": [
{
"metrics": [
{
"other": {
"content": {
"id": "CVE-2026-16147",
"options": [
{
"Exploitation": "none"
},
{
"Automatable": "no"
},
{
"Technical Impact": "total"
}
],
"role": "CISA Coordinator",
"timestamp": "2026-09-14T20:04:57.852432Z",
"version": "2.0.3"
},
"type": "ssvc"
}
}
],
"providerMetadata": {
"dateUpdated": "2026-09-14T20:05:07.641Z",
"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
"shortName": "CISA-ADP"
},
"title": "CISA ADP Vulnrichment"
}
],
"cna": {
"affected": [
{
"collectionURL": "https://github.com/zephyrproject-rtos/zephyr",
"defaultStatus": "unaffected",
"packageName": "zephyr",
"product": "zephyr",
"programFiles": [
"drivers/usb/udc/udc_it82xx2.c"
],
"programRoutines": [
{
"name": "work_handler_out"
}
],
"vendor": "zephyrproject",
"versions": [
{
"lessThan": "4.4.2",
"status": "affected",
"version": "4.0.0",
"versionType": "semver"
}
]
}
],
"descriptions": [
{
"lang": "en",
"value": "The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event().\n\nBecause udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends \u0026buf-\u003enode to uds_ctx-\u003eep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled \u2014 a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending \u0026buf-\u003enode to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref().\n\nThe IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet \u2014 an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once."
}
],
"metrics": [
{
"cvssV3_1": {
"baseScore": 6.8,
"baseSeverity": "MEDIUM",
"vectorString": "CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"format": "CVSS"
}
],
"problemTypes": [
{
"descriptions": [
{
"cweId": "CWE-416",
"description": "use-after-free",
"lang": "en",
"type": "CWE"
}
]
}
],
"providerMetadata": {
"dateUpdated": "2026-09-14T19:33:46.303Z",
"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"shortName": "zephyr"
},
"references": [
{
"name": "Fix commit",
"tags": [
"patch"
],
"url": "https://github.com/zephyrproject-rtos/zephyr/commit/2abc3088a6598579cf322452801a13cb0ec57b0e"
},
{
"name": "GHSA-3q4g-7w6j-8qfp",
"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-3q4g-7w6j-8qfp"
}
],
"title": "it82xx2 USB device controller submits incomplete OUT transfer buffers, causing use-after-free and event-list corruption",
"x_generator": {
"engine": "cvelib 1.8.0"
}
}
},
"cveMetadata": {
"assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad",
"assignerShortName": "zephyr",
"cveId": "CVE-2026-16147",
"datePublished": "2026-09-14T19:33:46.303Z",
"dateReserved": "2026-07-17T18:21:31.577Z",
"dateUpdated": "2026-09-14T20:05:14.713Z",
"state": "PUBLISHED"
},
"dataType": "CVE_RECORD",
"dataVersion": "5.2"
}
}
}
Loading…
Loading…
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.
Loading…