CVE-2026-90400 (GCVE-0-2026-90400)

Vulnerability from cvelistv5 – Published: 2026-09-17 16:09 – Updated: 2026-09-17 16:09
VLAI
Title
md: recheck spare changes before starting sync
Summary
In the Linux kernel, the following vulnerability has been resolved: md: recheck spare changes before starting sync remove_spares() and remove_and_add_spares() modify the array's rdev configuration. These operations are only safe after the array has been suspended. md_start_sync() checks whether spare configuration changes are needed before taking reconfig_mutex. However, the rdev state can change before the mutex is acquired, so the initial check can become stale. In that case, md_choose_sync_action() may remove or replace rdevs while normal I/O is still accessing them. The race can occur as follows: raid10d Worker Normal IO ____________ _______________________ ______________________ raid10_write_request() wait_blocked_dev() set Blocked set Faulty Skip Faulty rdev rrdev->nr_pending++ .repl_bio = bio removeable_rdev = false . array not suspended . lock mddev goto err_handle lock mddev (wait) . update sb . clear Blocked . . unlock mddev . lock mddev (acquires) remove_spares() removeable_rdev = true raid10_remove_disk() rdev = replacement replacement = NULL rdev_dec_pending(NULL) unlock mddev (NULL)->nr_pending-- In this case, rdev_dec_pending() is called with a NULL pointer, resulting in a NULL pointer dereference when attempting to decrement nr_pending. Fix this by suspending the array when spare configuration changes are needed, including for non-read-write arrays, and checking again after taking reconfig_mutex. If the array was not already suspended and a change is now needed, release the mutex, suspend the array, and reacquire the mutex before continuing.
Severity
No CVSS data available.
Assigner
References
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: bc08041b32abe6c9824f78735bac22018eabfc06 , < c3777d16bc3335c0ac4bdad0551c80d38c5d94cc (git)
Affected: bc08041b32abe6c9824f78735bac22018eabfc06 , < e5ac7ab78467b064f1da8b0f3042a63595fafcfd (git)
Affected: bc08041b32abe6c9824f78735bac22018eabfc06 , < 81b39df5d701976cf20e52f33106c1fc1603b4cb (git)
Affected: bc08041b32abe6c9824f78735bac22018eabfc06 , < c7d34d17ea43ebc86b45d439ebb435e11ca44bca (git)
guessed Create a notification for this product.
Linux Linux Affected: 6.7
Unaffected: 0 , < 6.7 (semver)
Unaffected: 6.12.110 , ≤ 6.12.* (semver)
Unaffected: 6.18.52 , ≤ 6.18.* (semver)
Unaffected: 7.2.6 , ≤ 7.2.* (semver)
Unaffected: 7.3-rc1 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "drivers/md/md.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "c3777d16bc3335c0ac4bdad0551c80d38c5d94cc",
              "status": "affected",
              "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
              "versionType": "git"
            },
            {
              "lessThan": "e5ac7ab78467b064f1da8b0f3042a63595fafcfd",
              "status": "affected",
              "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
              "versionType": "git"
            },
            {
              "lessThan": "81b39df5d701976cf20e52f33106c1fc1603b4cb",
              "status": "affected",
              "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
              "versionType": "git"
            },
            {
              "lessThan": "c7d34d17ea43ebc86b45d439ebb435e11ca44bca",
              "status": "affected",
              "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "drivers/md/md.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.7"
            },
            {
              "lessThan": "6.7",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.110",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.52",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.2.*",
              "status": "unaffected",
              "version": "7.2.6",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.3-rc1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.110",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.52",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.2.6",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.3-rc1",
                  "versionStartIncluding": "6.7",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd: recheck spare changes before starting sync\n\nremove_spares() and remove_and_add_spares() modify the array\u0027s rdev\nconfiguration. These operations are only safe after the array has been\nsuspended.\n\nmd_start_sync() checks whether spare configuration changes are needed\nbefore taking reconfig_mutex. However, the rdev state can change before\nthe mutex is acquired, so the initial check can become stale. In that\ncase, md_choose_sync_action() may remove or replace rdevs while normal\nI/O is still accessing them.\n\nThe race can occur as follows:\n\nraid10d          Worker                      Normal IO\n____________     _______________________     ______________________\n\n                                             raid10_write_request()\n                                             wait_blocked_dev()\nset Blocked\nset Faulty\n                                             Skip Faulty rdev\n                                             rrdev-\u003enr_pending++\n                                             .repl_bio = bio\n                 removeable_rdev = false     .\n                 array not suspended         .\nlock mddev                                   goto err_handle\n                 lock mddev (wait)\n                 .\nupdate sb        .\nclear Blocked    .\n                 .\nunlock mddev     .\n                 lock mddev (acquires)\n                 remove_spares()\n                 removeable_rdev = true\n\n                 raid10_remove_disk()\n                 rdev = replacement\n                 replacement = NULL\n                                             rdev_dec_pending(NULL)\n                 unlock mddev                (NULL)-\u003enr_pending--\n\nIn this case, rdev_dec_pending() is called with a NULL pointer,\nresulting in a NULL pointer dereference when attempting to decrement\nnr_pending.\n\nFix this by suspending the array when spare configuration changes are\nneeded, including for non-read-write arrays, and checking again after\ntaking reconfig_mutex. If the array was not already suspended and a\nchange is now needed, release the mutex, suspend the array, and\nreacquire the mutex before continuing."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-09-17T16:09:30.915Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/c3777d16bc3335c0ac4bdad0551c80d38c5d94cc"
        },
        {
          "url": "https://git.kernel.org/stable/c/e5ac7ab78467b064f1da8b0f3042a63595fafcfd"
        },
        {
          "url": "https://git.kernel.org/stable/c/81b39df5d701976cf20e52f33106c1fc1603b4cb"
        },
        {
          "url": "https://git.kernel.org/stable/c/c7d34d17ea43ebc86b45d439ebb435e11ca44bca"
        }
      ],
      "title": "md: recheck spare changes before starting sync",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-90400",
    "datePublished": "2026-09-17T16:09:30.915Z",
    "dateReserved": "2026-09-11T19:38:34.811Z",
    "dateUpdated": "2026-09-17T16:09:30.915Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-90400",
      "date": "2026-09-29",
      "epss": "0.00209",
      "percentile": "0.09888"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "drivers/md/md.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "c3777d16bc3335c0ac4bdad0551c80d38c5d94cc",
                    "status": "affected",
                    "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "e5ac7ab78467b064f1da8b0f3042a63595fafcfd",
                    "status": "affected",
                    "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "81b39df5d701976cf20e52f33106c1fc1603b4cb",
                    "status": "affected",
                    "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "c7d34d17ea43ebc86b45d439ebb435e11ca44bca",
                    "status": "affected",
                    "version": "bc08041b32abe6c9824f78735bac22018eabfc06",
                    "versionType": "git"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "drivers/md/md.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "6.7"
                  },
                  {
                    "lessThan": "6.7",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.110",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.52",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "7.2.*",
                    "status": "unaffected",
                    "version": "7.2.6",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.3-rc1",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd: recheck spare changes before starting sync\n\nremove_spares() and remove_and_add_spares() modify the array\u0027s rdev\nconfiguration. These operations are only safe after the array has been\nsuspended.\n\nmd_start_sync() checks whether spare configuration changes are needed\nbefore taking reconfig_mutex. However, the rdev state can change before\nthe mutex is acquired, so the initial check can become stale. In that\ncase, md_choose_sync_action() may remove or replace rdevs while normal\nI/O is still accessing them.\n\nThe race can occur as follows:\n\nraid10d          Worker                      Normal IO\n____________     _______________________     ______________________\n\n                                             raid10_write_request()\n                                             wait_blocked_dev()\nset Blocked\nset Faulty\n                                             Skip Faulty rdev\n                                             rrdev-\u003enr_pending++\n                                             .repl_bio = bio\n                 removeable_rdev = false     .\n                 array not suspended         .\nlock mddev                                   goto err_handle\n                 lock mddev (wait)\n                 .\nupdate sb        .\nclear Blocked    .\n                 .\nunlock mddev     .\n                 lock mddev (acquires)\n                 remove_spares()\n                 removeable_rdev = true\n\n                 raid10_remove_disk()\n                 rdev = replacement\n                 replacement = NULL\n                                             rdev_dec_pending(NULL)\n                 unlock mddev                (NULL)-\u003enr_pending--\n\nIn this case, rdev_dec_pending() is called with a NULL pointer,\nresulting in a NULL pointer dereference when attempting to decrement\nnr_pending.\n\nFix this by suspending the array when spare configuration changes are\nneeded, including for non-read-write arrays, and checking again after\ntaking reconfig_mutex. If the array was not already suspended and a\nchange is now needed, release the mutex, suspend the array, and\nreacquire the mutex before continuing."
          }
        ],
        "id": "CVE-2026-90400",
        "lastModified": "2026-09-17T17:17:39.753",
        "metrics": {},
        "published": "2026-09-17T17:17:39.753",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/81b39df5d701976cf20e52f33106c1fc1603b4cb"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/c3777d16bc3335c0ac4bdad0551c80d38c5d94cc"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/c7d34d17ea43ebc86b45d439ebb435e11ca44bca"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "url": "https://git.kernel.org/stable/c/e5ac7ab78467b064f1da8b0f3042a63595fafcfd"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Received"
      }
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-09-22T16:28:46Z",
      "cve": "CVE-2026-90400",
      "id": "CVE-2026-90400",
      "initial_release_date": "2026-09-18T00:16:51Z",
      "product_status:known_affected": "108",
      "product_status:known_not_affected": "239",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-90400",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2026-90400.json",
      "version": "4"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.





Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.



Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.