CVE-2026-64141 (GCVE-0-2026-64141)

Vulnerability from cvelistv5 – Published: 2026-07-19 15:40 – Updated: 2026-08-05 12:39
VLAI
Title
ksmbd: fix null pointer dereference in compare_guid_key()
Summary
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in compare_guid_key() session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result.
Impacted products
Vendor Product Version CPE status
Linux Linux Affected: 8df4bcdb0a4232192b2445256c39b787d58ef14d , < e43cb36d4d7827710cfcd48e95e29a507f0d87be (git)
Affected: c8efcc786146a951091588e5fa7e3c754850cb3c , < 0836081b394ca074d1b910f2b990ff7b4b4404c7 (git)
Affected: c8efcc786146a951091588e5fa7e3c754850cb3c , < cd5c1b75d2f454f625d7dc55bd3ae21d0855f6ad (git)
Affected: c8efcc786146a951091588e5fa7e3c754850cb3c , < af86896ca3239e25a6bd7d352213371265073d38 (git)
Affected: c8efcc786146a951091588e5fa7e3c754850cb3c , < 4b83cbc4c15f09b000cc06f033f64b0824b6dc87 (git)
Affected: 6.6.32 , < 6.6.142 (semver)
guessed Create a notification for this product.
Linux Linux Affected: 6.9
Unaffected: 0 , < 6.9 (semver)
Unaffected: 6.6.142 , ≤ 6.6.* (semver)
Unaffected: 6.12.92 , ≤ 6.12.* (semver)
Unaffected: 6.18.34 , ≤ 6.18.* (semver)
Unaffected: 7.0.11 , ≤ 7.0.* (semver)
Unaffected: 7.1 , ≤ * (original_commit_for_fix)
guessed Create a notification for this product.
Show details on NVD website

{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "fs/smb/server/oplock.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "e43cb36d4d7827710cfcd48e95e29a507f0d87be",
              "status": "affected",
              "version": "8df4bcdb0a4232192b2445256c39b787d58ef14d",
              "versionType": "git"
            },
            {
              "lessThan": "0836081b394ca074d1b910f2b990ff7b4b4404c7",
              "status": "affected",
              "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
              "versionType": "git"
            },
            {
              "lessThan": "cd5c1b75d2f454f625d7dc55bd3ae21d0855f6ad",
              "status": "affected",
              "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
              "versionType": "git"
            },
            {
              "lessThan": "af86896ca3239e25a6bd7d352213371265073d38",
              "status": "affected",
              "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
              "versionType": "git"
            },
            {
              "lessThan": "4b83cbc4c15f09b000cc06f033f64b0824b6dc87",
              "status": "affected",
              "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
              "versionType": "git"
            },
            {
              "lessThan": "6.6.142",
              "status": "affected",
              "version": "6.6.32",
              "versionType": "semver"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "fs/smb/server/oplock.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "6.9"
            },
            {
              "lessThan": "6.9",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.6.*",
              "status": "unaffected",
              "version": "6.6.142",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.12.*",
              "status": "unaffected",
              "version": "6.12.92",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.18.*",
              "status": "unaffected",
              "version": "6.18.34",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "7.0.*",
              "status": "unaffected",
              "version": "7.0.11",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "7.1",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.6.142",
                  "versionStartIncluding": "6.6.32",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.12.92",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.18.34",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.0.11",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "7.1",
                  "versionStartIncluding": "6.9",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nksmbd: fix null pointer dereference in compare_guid_key()\n\nsession_fd_check() walks the per-inode m_op_list during durable-handle\nsession teardown and sets op-\u003econn = NULL for every opinfo whose conn\nmatched the closing session\u0027s connection. The matching opinfo, however,\nstays linked in its per-ClientGuid lease_table_list entry\u0027s lb-\u003elease_list\nbecause destroy_lease_table() only runs on full TCP-connection teardown,\nnot on SESSION_LOGOFF.\n\nIf the same TCP connection then negotiates a fresh session with the\nsame ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and\nis unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a\nlease context on a different inode, find_same_lease_key() walks\nlb-\u003elease_list, reaches the stale opinfo, and calls compare_guid_key(),\nwhich unconditionally dereferences opinfo-\u003econn-\u003eClientGUID. The conn\npointer is NULL and the kernel panics.\n\nReproducer requires only a successful SMB2 SESSION_SETUP and a share\nconfigured with \u0027durable handles = yes\u0027. KASAN report on mainline\n70390501d194:\n\n  general protection fault, probably for non-canonical address\n  0xdffffc0000000069: 0000 [#1] SMP KASAN PTI\n  KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]\n  Workqueue: ksmbd-io handle_ksmbd_work\n  RIP: 0010:bcmp+0x5b/0x230\n  Call Trace:\n   compare_guid_key+0x4b/0xd0\n   find_same_lease_key+0x324/0x690\n   smb2_open+0x6aea/0x8e60\n   handle_ksmbd_work+0x796/0xee0\n   ...\n\nFaulting address 0x348 is the offset of ClientGUID within struct\nksmbd_conn, confirming opinfo-\u003econn was NULL.\n\nRead opinfo-\u003econn once and bail out if it has been cleared by a\nconcurrent session_fd_check(). A half-detached opinfo cannot be the\nowner of an active lease, so returning 0 is the correct match result."
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "baseScore": 7.5,
            "baseSeverity": "HIGH",
            "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
            "version": "3.1"
          },
          "scenarios": [
            {
              "lang": "en",
              "value": "AV:N - ksmbd is an in-kernel SMB server on TCP/445; the crash is triggered by remote SMB2 packets processed in `handle_ksmbd_work()` without local access.\nAC:L - The attacker fully controls the deterministic sequence (durable CREATE with lease, SESSION_LOGOFF, SESSION_SETUP on the same TCP connection, CREATE with lease on another file); no race or timing dependency beyond attacker-driven requests.\nPR:N - Exploitation requires only network reachability to ksmbd and completion of SMB2 SESSION_SETUP (including guest/anonymous where permitted); no prior Linux OS privileges or capabilities are needed on the host.\nUI:N - No victim user action is required beyond the attacker sending crafted SMB2 protocol messages to the server.\nS:U - Impact is a kernel oops/panic within the ksmbd server context; it does not cross a security boundary such as guest-to-host escape or sandbox breakout.\nC:N - The fault is a NULL pointer dereference in `bcmp()` at offset 0x348 into `struct ksmbd_conn`; the invalid read faults before any data is returned to the attacker.\nI:N - There is no memory corruption or write primitive\u2014only a read through a NULL `opinfo-\u003econn` pointer that immediately triggers a kernel fault.\nA:H - A remotely triggerable NULL dereference in kernel workqueue context causes a general protection fault/kernel oops, enabling repeatable denial of service against the host."
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2026-08-05T12:39:41.570Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/e43cb36d4d7827710cfcd48e95e29a507f0d87be"
        },
        {
          "url": "https://git.kernel.org/stable/c/0836081b394ca074d1b910f2b990ff7b4b4404c7"
        },
        {
          "url": "https://git.kernel.org/stable/c/cd5c1b75d2f454f625d7dc55bd3ae21d0855f6ad"
        },
        {
          "url": "https://git.kernel.org/stable/c/af86896ca3239e25a6bd7d352213371265073d38"
        },
        {
          "url": "https://git.kernel.org/stable/c/4b83cbc4c15f09b000cc06f033f64b0824b6dc87"
        }
      ],
      "title": "ksmbd: fix null pointer dereference in compare_guid_key()",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2026-64141",
    "datePublished": "2026-07-19T15:40:33.890Z",
    "dateReserved": "2026-07-19T07:54:57.037Z",
    "dateUpdated": "2026-08-05T12:39:41.570Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.2",
  "vulnerability-lookup:meta": {
    "epss": {
      "cve": "CVE-2026-64141",
      "date": "2026-09-21",
      "epss": "0.00441",
      "percentile": "0.37597"
    },
    "nvd": {
      "cve": {
        "affected": [
          {
            "affectedData": [
              {
                "defaultStatus": "unaffected",
                "product": "Linux",
                "programFiles": [
                  "fs/smb/server/oplock.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "lessThan": "e43cb36d4d7827710cfcd48e95e29a507f0d87be",
                    "status": "affected",
                    "version": "8df4bcdb0a4232192b2445256c39b787d58ef14d",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "0836081b394ca074d1b910f2b990ff7b4b4404c7",
                    "status": "affected",
                    "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "cd5c1b75d2f454f625d7dc55bd3ae21d0855f6ad",
                    "status": "affected",
                    "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "af86896ca3239e25a6bd7d352213371265073d38",
                    "status": "affected",
                    "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "4b83cbc4c15f09b000cc06f033f64b0824b6dc87",
                    "status": "affected",
                    "version": "c8efcc786146a951091588e5fa7e3c754850cb3c",
                    "versionType": "git"
                  },
                  {
                    "lessThan": "6.6.142",
                    "status": "affected",
                    "version": "6.6.32",
                    "versionType": "semver"
                  }
                ]
              },
              {
                "defaultStatus": "affected",
                "product": "Linux",
                "programFiles": [
                  "fs/smb/server/oplock.c"
                ],
                "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
                "vendor": "Linux",
                "versions": [
                  {
                    "status": "affected",
                    "version": "6.9"
                  },
                  {
                    "lessThan": "6.9",
                    "status": "unaffected",
                    "version": "0",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.6.*",
                    "status": "unaffected",
                    "version": "6.6.142",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.12.*",
                    "status": "unaffected",
                    "version": "6.12.92",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "6.18.*",
                    "status": "unaffected",
                    "version": "6.18.34",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "7.0.*",
                    "status": "unaffected",
                    "version": "7.0.11",
                    "versionType": "semver"
                  },
                  {
                    "lessThanOrEqual": "*",
                    "status": "unaffected",
                    "version": "7.1",
                    "versionType": "original_commit_for_fix"
                  }
                ]
              }
            ],
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
          }
        ],
        "configurations": [
          {
            "nodes": [
              {
                "cpeMatch": [
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "62E14AE2-F81A-4314-8E21-DE91CC8D20C7",
                    "versionEndExcluding": "6.6.142",
                    "versionStartIncluding": "6.6.32",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "8DA2A75E-CE43-4FDB-A0D5-74277B51F5B2",
                    "versionEndExcluding": "6.12.92",
                    "versionStartIncluding": "6.9",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "A4B1EF6D-18D7-4838-BC37-7499D5DCC3C0",
                    "versionEndExcluding": "6.18.34",
                    "versionStartIncluding": "6.13",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                    "matchCriteriaId": "0520D091-FC52-4A50-AF07-70AE7D08B750",
                    "versionEndExcluding": "7.0.11",
                    "versionStartIncluding": "6.19",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc1:*:*:*:*:*:*",
                    "matchCriteriaId": "B1EF7059-E670-45F4-B422-54C40FA86390",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc2:*:*:*:*:*:*",
                    "matchCriteriaId": "0D38F0BF-A728-4133-A358-D44A2F7EE6D6",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc3:*:*:*:*:*:*",
                    "matchCriteriaId": "EC732D08-5F7B-46D9-B154-E60C7F4F0A97",
                    "vulnerable": true
                  },
                  {
                    "criteria": "cpe:2.3:o:linux:linux_kernel:7.1:rc4:*:*:*:*:*:*",
                    "matchCriteriaId": "E5910A9D-F60A-409A-B486-FE66BFEBA9B9",
                    "vulnerable": true
                  }
                ],
                "negate": false,
                "operator": "OR"
              }
            ]
          }
        ],
        "cveTags": [],
        "descriptions": [
          {
            "lang": "en",
            "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nksmbd: fix null pointer dereference in compare_guid_key()\n\nsession_fd_check() walks the per-inode m_op_list during durable-handle\nsession teardown and sets op-\u003econn = NULL for every opinfo whose conn\nmatched the closing session\u0027s connection. The matching opinfo, however,\nstays linked in its per-ClientGuid lease_table_list entry\u0027s lb-\u003elease_list\nbecause destroy_lease_table() only runs on full TCP-connection teardown,\nnot on SESSION_LOGOFF.\n\nIf the same TCP connection then negotiates a fresh session with the\nsame ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and\nis unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a\nlease context on a different inode, find_same_lease_key() walks\nlb-\u003elease_list, reaches the stale opinfo, and calls compare_guid_key(),\nwhich unconditionally dereferences opinfo-\u003econn-\u003eClientGUID. The conn\npointer is NULL and the kernel panics.\n\nReproducer requires only a successful SMB2 SESSION_SETUP and a share\nconfigured with \u0027durable handles = yes\u0027. KASAN report on mainline\n70390501d194:\n\n  general protection fault, probably for non-canonical address\n  0xdffffc0000000069: 0000 [#1] SMP KASAN PTI\n  KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]\n  Workqueue: ksmbd-io handle_ksmbd_work\n  RIP: 0010:bcmp+0x5b/0x230\n  Call Trace:\n   compare_guid_key+0x4b/0xd0\n   find_same_lease_key+0x324/0x690\n   smb2_open+0x6aea/0x8e60\n   handle_ksmbd_work+0x796/0xee0\n   ...\n\nFaulting address 0x348 is the offset of ClientGUID within struct\nksmbd_conn, confirming opinfo-\u003econn was NULL.\n\nRead opinfo-\u003econn once and bail out if it has been cleared by a\nconcurrent session_fd_check(). A half-detached opinfo cannot be the\nowner of an active lease, so returning 0 is the correct match result."
          }
        ],
        "id": "CVE-2026-64141",
        "lastModified": "2026-08-18T12:39:25.733",
        "metrics": {
          "cvssMetricV31": [
            {
              "cvssData": {
                "attackComplexity": "LOW",
                "attackVector": "NETWORK",
                "availabilityImpact": "HIGH",
                "baseScore": 7.5,
                "baseSeverity": "HIGH",
                "confidentialityImpact": "NONE",
                "integrityImpact": "NONE",
                "privilegesRequired": "NONE",
                "scope": "UNCHANGED",
                "userInteraction": "NONE",
                "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
                "version": "3.1"
              },
              "exploitabilityScore": 3.9,
              "impactScore": 3.6,
              "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
              "type": "Secondary"
            }
          ]
        },
        "published": "2026-07-19T16:17:55.983",
        "references": [
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/0836081b394ca074d1b910f2b990ff7b4b4404c7"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/4b83cbc4c15f09b000cc06f033f64b0824b6dc87"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/af86896ca3239e25a6bd7d352213371265073d38"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/cd5c1b75d2f454f625d7dc55bd3ae21d0855f6ad"
          },
          {
            "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
            "tags": [
              "Patch"
            ],
            "url": "https://git.kernel.org/stable/c/e43cb36d4d7827710cfcd48e95e29a507f0d87be"
          }
        ],
        "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "vulnStatus": "Analyzed",
        "weaknesses": [
          {
            "description": [
              {
                "lang": "en",
                "value": "CWE-476"
              }
            ],
            "source": "nvd@nist.gov",
            "type": "Primary"
          }
        ]
      }
    },
    "redhat_vex": {
      "aggregate_severity": "Moderate",
      "current_release_date": "2026-07-20T16:48:06+00:00",
      "cve": "CVE-2026-64141",
      "id": "CVE-2026-64141",
      "initial_release_date": "2026-07-19T00:00:00+00:00",
      "product_status:known_not_affected": "275",
      "source": "Red Hat CSAF VEX",
      "status": "final",
      "title": "kernel: ksmbd: fix null pointer dereference in compare_guid_key()",
      "url": "https://security.access.redhat.com/data/csaf/v2/vex/2026/cve-2026-64141.json",
      "version": "3"
    },
    "suse_vex": {
      "aggregate_severity": "moderate",
      "current_release_date": "2026-08-14T23:46:47Z",
      "cve": "CVE-2026-64141",
      "id": "CVE-2026-64141",
      "initial_release_date": "2026-07-21T12:58:57Z",
      "product_status:known_not_affected": "296",
      "source": "SUSE CSAF VEX",
      "status": "interim",
      "title": "SUSE CVE CVE-2026-64141",
      "url": "https://ftp.suse.com/pub/projects/security/csaf-vex/cve-2026-64141.json",
      "version": "4"
    }
  }
}



Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.

Sightings

Author Source Type Date Other

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or observed by the user.
  • Confirmed: The vulnerability has been validated from an analyst's perspective.
  • Published Proof of Concept: A public proof of concept is available for this vulnerability.
  • Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
  • Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
  • Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
  • Not confirmed: The user expressed doubt about the validity of the vulnerability.
  • Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.

Loading…

Detection rules are retrieved from Rulezet.

Loading…

Loading…

Related by attack behaviour

Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.


Loading…